If you're looking to truly customize your 2020-2021 3.6L V6 Gladiator's setup, then you'll need to be able to control all of it via one simple, easy-to-use system, like this Superchips Flashcal (3571-JT)! Along with a variety of key features, the Superchips Flashcal (3571-JT) for the 2020-2021 Jeep Gladiator will allow you to enable / disable the following: DRL dropout, Fog light dropout, Halo lights(LED models), One touch lane change, Seat belt reminder, Travel link weather warning, Auto stop/start, Auxiliary switches, Blind spot detection, Sway bar system, and the Backup camera.
Features and Benefits:
- Corrects speedometer for tire upgrades between 25"- 41"
- Speedometer recalibration for gear/axle swaps from 2.73- 5.38
- Transfer case gear low: 2.72-5.00
- Adjusts engine idle from 700-2000 RPMs
- Sway bar disconnect in 2HI (up to 25 MPH)
- TPMS on/off (requires separate download)
- TPMS warning threshold from 22-56psi
- Daytime running light options including dropout on/off and location (high beam, low beam, turn signal, fog lights, fender lights)
- Reads and clears diagnostic trouble codes
- Digital battery voltage display
- Real time data logging
- Real time data monitoring
- Device features easy-to-read color screen
- Superchips includes detailed instructions and necessary cords
- Unit easily updates via internet connection for future changes/options
Superchips understands that you've probably installed a number of different aftermarket parts or completed a ton of customized modifications on your new JT Gladiator, so you'll need an easy and efficient way to control everything efficiently. That's where this Flashcal from Superchips comes into play! You'll be able to correct your Jeep's speedometer if you've upgraded to bigger tires, swapped the gears, or removed the electronic sway bar disconnect. You'll have a ton of options when it comes to your vehicle's daytime running lights and you'll be able to control the TPMS (with a separate download) depending on when you need or don't need the system.
Please Note: Results and features may vary based on vehicle model and aftermarket upgrades installed onto your Jeep. Please read all instructions before installation and/or operation of this Flashcal.
Vehicle Fitment Notes:
- This tuner has not been tested or validated on right hand drive Jeep applications or imported (non-American VIN based) Jeep applications. They are not supported by this product at this time.
- The Superchips Flashcal does not currently support Jeeps equipped with the 3.0L V6 EcoDiesel.