Sway Bar Front 1" Complete Kit Mustang 1967-1970

The stock suspension in your 1967-1970 Mustang does an adequate job in normal, predictable conditions and maneuvers. Where you may run into a problem is when you need to make a sudden lane change to avoid an accident or when you find that a curve in the road is a little sharper than you thought. As your vehicle begins to turn, the body will roll, transferring weight to the outside wheels. This causes the front end to plow, or what is technically known as understeer. The result: Your vehicle wants to keep going straight and you're now out of control.

This 1" Front Sway Bar Kit with Polyurethane Bushings and Grommets will bolt directly in place beneath your Mustang. It will reinforce and balance your suspension and give you more control. This quality sway bar is made of high-carbon steel and is hardened and stress-relieved with forged and countersunk eyelets to give your suspension superior support during sudden or sharp turns. With the addition of this anti-sway bar, body roll and understeer will be greatly reduced.

Features and Benefits: 
- Reduces Body Roll and Understeer
- Reinforces and Balances Suspension
- Improves Control and Handling
- Direct Replacement 
- Increases Overall Suspension Performance
- Constructed of High-Carbon Steel with Hot Forged Ends and Cadmium Plating
- Gloss Black Finish

This sway bar is a direct replacement for the thin, weaker factory Ford sway bars. This kit includes polyurethane mounting bushings and links with polyurethane grommets. This ensures the longevity of your bushings and hardware, as well as a sharp suspension performance increase. The included hardware consists of heat-treated 5,000 lb. end-link bolts, zinc chromate coated brackets, double-beveled polyurethane bushings and plated, cupped washers. You can reduce understeering, body roll and altogether sloppy handling by adding rigidity with this superior 1" Front Sway Bar Kit with Polyurethane Bushings and Grommets.

Kit Includes:
- Front Sway Bar
- Black Polyurethane Bushings
- Installation Hardware

Please Note: Will NOT fit 1967-1970 Big Block Mustangs due to oil filter clearance; use FSB2A.