T-5 Transmission Conversion Kit For Early Model Bellhousings Basic 1967-1973

CJ's Part Number:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 171.99ms
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $467.96
You save 6%

Basic T-5 Transmission Conversion Kit for 1967-1973 Mustangs with an Early Model Bellhousing.

This kit provides the necessary pieces to let 1967-1973 Mustang owners mount a modern T-5 transmission onto an early model bellhousing.

Basic T-5 Conversion Kit Includes:
- California Pony Cars T-5 adapter plate 6-bolt (T5AP)
- Transmission crossmember (T5C8)
- Drive shaft slip yoke
- Rubber transmission mount

T5AP works with bellhousings with these casting numbers:

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.69ms
  • bvseo-msg: HTTP status code of 404 was returned;

Is the input shaft on the t-5 the same as a ford top loader such that I don’t have to change the clutch or pilot bushing in the engine. Small block 289. Thanks

Asked by: Good boys garage
You will have to change the clutch and change the bushing to a bearing.
Answered by: jmg1
Date published: 2019-08-02

Can this adapter be installed with the bellhouse still on the car or does it have to be removed 

Asked by: Benny713
You should be able to install it with out removing the bellhousing.
Answered by: rk cjpp
Date published: 2018-09-17

I have a 69 mustang with a 302 will I still need to shorten the drive shaft 

Asked by: Curt19661972
Answered by: rk cjpp
Date published: 2018-07-23

Can this T-5 conversion kit work with a C5AA-6394-B bellhousing? It's for a 351c ina 70 mustang.

Asked by: Joe 35
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2017-05-08

I have a 1968 390 gt will this kit work? Or will the 390 have more power than the trans can take thanks 

Asked by: Nfrutiger7
If you use an upgraded t5 it should hold up but you will have to check the casting numbers on the bellhousing to see if the adapter will work with it, they are C5AA-6394-A C5DA-6394-A C9OA-6394-A D2OA-6394-AA
Answered by: rk cjpp
Date published: 2016-02-16

Mustang 1967 3 speed manual need conversion kit for T5, please give advice. If need more information let me know. Thank you...

Asked by: Marian
We offer several different kits to install a t-5 depending on what parts you have or plan on using. Please call toll free at 1-800-888-6473 and speak with a sales rep.
Answered by: rk cjpp
Date published: 2015-12-15

1967 mustang 3 speed manual and would like to install a t5 conversion kit and transmission in it. The mustang is for my son in law who is in the Army and I am retired Air Force. I will use my old bell housing and clutch. Do you offer any discounts? Thanks

Asked by: Clif
Keep an eye on our website - new sales and deals are happening regularly!
Answered by: CJ Pony Parts
Date published: 2015-03-12
  • y_2020, m_3, d_27, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_T5CK4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 158.21ms