Tail Light Assembly LED 1965-1966

CJ's Part Number:
TLLED12
Tail Light Assembly LED 1965-1966 is rated 4.7 out of 5 by 40.
  • y_2019, m_10, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_US, sid_TLLED12, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 35.77ms
  • REVIEWS, PRODUCT

Highlights

  • 68 Bright Red LEDs
  • 1157 Plug Type
  • Fully Sealed Electronics
  • Hi-Temp Lens
$45.99

LED Tail Light Assembly for all 1965-1966 Mustangs.

Upgrade your 1965-1966 Mustang's tail lights with these LED Tail Light Assemblies, now available from CJ Pony Parts!

This direct-fit, plug-and-play tail light assembly is made of high-quality plastic and has the LED bulbs and wiring already integrated for easy and simple installation. The upgraded LED bulbs will be brighter and last longer than the original factory ones, and you'll love the way they improve your classic pony's style! LEDs are more than just visual upgrades. LEDs will bring safety to you and your Mustang. Brighter lights in your tail lights means your pony will be more visible to other drivers when you're out on the road, and you're less likely to get into a severe accident.

LED Tail Light Assembly Features:
- Individually sold for either driver or passenger side
- 68 Super Bright LED's
- Polycarbonate High Temperature Lens
- Uses factory style 1157 plug
- Fully Sealed Electronics

Please Note: Two LED tail light assemblies are required to complete both driver and passenger side of a classic coupe, convertible or fastback Mustang.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this LED Tail Light Assembly for your 1965-1966 Mustang from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from BIG difference Plug and play as stated. I ended up switching everything out, including the taillight body as my old one was a little bent. I took a picture (and attached) of one with the LED and one with the bulb when brake is pressed so you could see how much difference it made. Now I'm not worried about being seen during night or even day. I bought these for like $32 during their recent sale as I'm not sure I would purchase at normal price. Worth noting I did try just buying a 1157 LED tree bulb using my old stock lens and it worked, but wasn't as bright as these full LED replacements.
Date published: 2017-12-03
Rated 5 out of 5 by from Bright lights, easy install This was so simple to install, and the payoff is great. No one will tailgate me with these bright babies. My only negative feedback is that the bulbs don't extend all the way to the top and bottom. You can see in the video--lights stop short. The brakes work, but when I see the older lights and how the three segments all lit up completely, I can't help but think some part of he experience is lost. I mean, Mustang has had this tri-partition assembly for ever, right? In other words, it was product managed by the accountant who didn't drive a Mustang.
Date published: 2017-04-21
Rated 5 out of 5 by from What a difference!! I installed these led taillights on my 1966 convertible and they are very bright and work great!! I have owned 1966 Mustangs for over thirty years and have always been worried about the brightness of the taillights and the possibility of being rear-ended if someone didn't see the lights. This is a great way to upgrade your old Stang while still keeping it looking original.
Date published: 2015-01-07
Rated 5 out of 5 by from Super bright LED's I purchased these tail lights and was amazed in the difference from the original. Now you can see the brake lights during daylight hours. A must have for safety to protect your car from a collision due to inadequate lighting. Upgrades to today's standard of brake lights. I highly recommend.
Date published: 2015-01-07
Rated 5 out of 5 by from Red Giant Awesome upgrade for my mustang! These LEDs are very easy to install. It comes as one sealed unit and is very high quality! The unit is very easy to install and when installed shine as bright as a red giant star! The LEDs give your mustang a very good look!
Date published: 2015-01-08
Rated 5 out of 5 by from Better visibility. If they do not burn, you see almost no difference from the original. Feel safer now!
Date published: 2015-01-10
Rated 5 out of 5 by from Bright light I am always looking at products to enhance my driving experience while retaining a stock look. These tail light make a world of difference. Most noticeable at night but far exceed the originals in daylight.
Date published: 2015-02-08
Rated 5 out of 5 by from Great!! I bought this for my '66 mustang and fits fast and very well!!! very bright and beautiful item!! thank you from Italy!
Date published: 2017-04-28
  • y_2019, m_10, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_US, sid_TLLED12, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.11ms
  • REVIEWS, PRODUCT

Everything works, except when I press the brakes checked all sockets orientation and they are all in as they should be. They turn on when I pull the headlights & the turn signals work as they should but I get nothing when I step on the brakes. Help plz

Asked by: Ezequiel Luna
You will have to check power to the sockets when the brakes are depressed, check for blown fuse and good ground.
Answered by: rk cjpp
Date published: 2019-05-17

I installed the recommended flasher, the turn signals work on both sides but the driver side doesn't turn on when I pull the headlights on or step on the brake... The passenger side works as it should, any ideas? Thx

Asked by: Ezequiel Luna
Check for bad connections in the socket and grounds. Make sure socket is oriented correctly.
Answered by: rk cjpp
Date published: 2019-04-30

Do these lights work in a 641/2 with a generator?

Asked by: myponycar
Yes.
Answered by: jmg1
Date published: 2018-12-27

Hello, does it fit on a 64 1/2?

Asked by: Nicolas
Yes it does.
Answered by: rk cjpp
Date published: 2018-11-12

Will these lights also flash for the turn signal 

Asked by: Brad66
Yes.
Answered by: rk cjpp
Date published: 2019-04-02

Can these be hard wired in instead of using the light socket? My sockets are worn out and I am wanting to use these without buying new housings.

Asked by: JimmyD59
You could but you should use a type of connector you can disconnect.
Answered by: rk cjpp
Date published: 2018-02-26

So I need gaskets for this ?

Asked by: Santa137
Yes.
Answered by: rk cjpp
Date published: 2017-11-28

I acquired from you the interior led light kit after installation the taillights only work as a running and stop lights, the directional lighting doesn't work, what should we do to fix it? Thanks. Dave Anaya

Asked by: Dave 65
You may need this flasher, http://www.cjponyparts.com/led-flasher-two-terminal-mustang-1965-1969-bronco-1966-1977/p/HW2811/
Answered by: rk cjpp
Date published: 2017-08-31
  • y_2019, m_10, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_TLLED12, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 30.72ms
  • QUESTIONS, PRODUCT
Complete Your Package
Add to Cart