Tail Light Lens Ford Tooling Bronco 1967-1977
Ford Tooling Tail Light Lens for all 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and 1977 Broncos.
When you are restoring your 1967-1977 Bronco, there are many parts that can prove to be difficult to locate. One of these is the tail light lenses. Fortunately for you, you are in luck as CJ Pony Parts now offers this all-new Ford Tooling Tail Light Lens that will fit perfectly onto your classic Bronco and is strong enough to survive the test of time.
Features & Benefits:
- Direct Replacement
- Manufactured from Fade Resistant Plastic
- Designed with Ford Tooling Specifications
- Correct SAE Markings & Ford Oval
- Increased Durability
- Available for Driver Side, Passenger Side or Pair for Both
- Officially Ford Licensed
- Made in the USA
This tail light lens is a direct replacement for the cracked or faulty one on your early model Bronco. Completely American made, this lens is manufactured from a high-quality, fade resistant plastic that will provide increased durability, so you won't have to worry about replacing your tail light lens again anytime soon.
Each officially Ford licensed lens features the correct SAE marking & Ford oval, just like the originals. And these are designed with Ford Tooling specifications, so you know fitting it onto your classic Bronco will be a breeze. Available for your driver or passenger side, as well as a pair for both, this Ford Tooling tail light lens will be both an aesthetic improvement along with a safety improvement as well!
If you have been searching tirelessly for a company that only sells the finest parts available to restore or modify your beloved 1966-1977 Ford Bronco, you have finally come to the right place. CJ Pony Parts has been a leader in the automotive industry for carrying the best Mustang parts available and is now your one stop shop for all things classic Ford Bronco!
What are you waiting on? Purchase this Ford Tooling Tail Light Lens for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 or 1977 Bronco from CJ Pony Parts today!
As you can see, our taillight lenses are pretty faded, and they have over spray on them. They weren't taped off the best when this truck was painted. They definitely need to be replaced, and all you need is a Phillips screwdriver. Grab your nice new, shiny lens and place it onto the taillight housing and thread in the screws. It does come with two new screws that look a whole lot better than our old rusty ones. That looks a lot better. We can do the other side.
We got our new taillight lenses installed on our '71 F250. They're looking a whole lot better. They're a lot more glossier. They really do add a nice touch to the rear of this truck, so much so that they make these reflectors look like crab, so we'll have to replace these soon as well. All you need is a Phillips screwdriver, maybe 10 minutes to do this. Before you know it, you'll be heading down the road.