Taillight Socket Replacement 1967-1973

CJ's Part Number:
HW1038
Taillight Socket Replacement 1967-1973 is rated 4.3 out of 5 by 4.
  • y_2019, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW1038, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 152.23ms
  • REVIEWS, PRODUCT

Highlights

  • Sold Individually
  • Factory Like Replacement
  • Factory Like Fitment
  • Fixes Faulty Tail Light Socket
$14.99

Replacement Taillight Socket for all 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

If you're replacing the taillights on your vintage 1967-1973 Mustang, then you need the correct parts to get the job done right! So make sure you pick up this Replacement Taillight Socket, available today from CJ Pony Parts!

This Replacement Taillight Socket is a direct fit replacement for your original taillight socket. You'll need two of these taillight sockets to do your repair both taillights on your classic Mustang. Taillights are vital to any car, including your Mustang. When there's a problem with the tail lights on your Mustang, you need to seek out the replacement parts for your Mustang tail lights, so those lights continue to work, perhaps better than ever before!

Please Note: This taillight socket is sold individually--two needed per Mustang.
Tech Tip:
1967-1970 Shelby Mustangs will need six of these replacement taillight sockets.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order a Replacement Taillight Socket for your 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from better fit than previous set I rebought these by mistake. the previous pair was not nearly as aggressive on the grip into the housing. much better fit.
Date published: 2015-10-24
Rated 3 out of 5 by from works good easy to install. tight fit. not made like original socket but works good.
Date published: 2015-04-13
Rated 5 out of 5 by from Good product This item fulfilled my requirements and I am pleased with the service given by Pony Parts.
Date published: 2016-08-26
Rated 4 out of 5 by from Perfect replacement Needed a replacement socket and this did the job!!
Date published: 2016-03-29
  • y_2019, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW1038, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.53ms
  • REVIEWS, PRODUCT

Will these bulb sockets fit directly to the tail light housing 71-73. Also which sockets would I need for same year rear side marker light. 

Asked by: V5cot
HW1038 will fit your taillights, use MLW1 for the side markers.
Answered by: rk cjpp
Date published: 2019-06-12

Searching for backup socket with single polarity for 1973 Mustang. All i see is double polarity for taillight.

Asked by: billy
Sorry we do not offer one.
Answered by: rk cjpp
Date published: 2019-05-12

are these sockets for the Brake lights ? what is your part # of this part?

Asked by: HVan
Yes, these are for parking and brake lights.
Answered by: rk cjpp
Date published: 2019-01-15

does this work for the rear signal light or for the backup light. if signal then i would need four?

Asked by: az13
This is for the turn signal/parking lights.
Answered by: rk cjpp
Date published: 2017-12-11

What is the size of this socket?

Asked by: souders
The socket is 1 inch long from the mounting surface to the wire pigtail, the o.d. of the mounting surface is 1 1/4 inch, the diameter of the tabs that hold the socket to the housing is 1 1/8 inch.
Answered by: rk cjpp
Date published: 2016-12-20
  • y_2019, m_10, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_HW1038, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 148.27ms
  • QUESTIONS, PRODUCT