TeraFlex Adjustable Track Bar Forged Front 0"-6" Lift Jeep Wrangler JK 2007-2018

TeraFlex:
1753418

Highlights

  • Stronger Than OE Track Bar
  • OE-Style Rubber Bushings
  • Enhanced Handling And Control
  • Designed For Durability
$326.99

TeraFlex Front Forged Adjustable Track Bar for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers with a 0" to 6" Lift.

Upgrade your 2007-2018 Jeep JK Wrangler with this Front Forged Adjustable Track Bar from TeraFlex. This adjustable track bar is designed for JKs with up to 6" of lift and is 230% stronger than your Wrangler's factory track bar.

Features and Benefits of the TeraFlex Front Forged Adjustable Track Bar (1753418):
- Stronger than factory track bar
- Uses OE-style rubber bushings
- Enhanced handling and control
- Designed for durability
- Bolt-on component
- Fits ALL JKs with stock to 6" of lift

TeraFlex's adjustable front track bar uses OE-style rubber bushings with an additional rate plate for superior handling and responsive control. Your JK Wrangler's front axle experiences tremendous amounts of lateral force during turning maneuvers and is increased exponentially when turning in restrictive off road situations. The TeraFlex forged monster track bar is specifically engineered and designed to withstand these abusive side loads.

This adjustable track bar allows lateral adjustment of the axle for proper axle alignment. No bracketry changes are necessary. This is a complete bolt-on component. The track bar is designed to cycle through the full movement of suspension travel without interfering with other components. It fits ALL JK Wrangler models with 0" to 6" of lift.

TeraFlex is a manufacturer of premium suspension systems, body armor, low-range gearing and high-performance axles for the Jeep Wrangler. TeraFlex was started in the fall of 1996 to meet the needs of a growing market for heavy duty off-road equipment and suspension enhancements.

Order TeraFlex's 1753418 Front Forged Adjustable Track Bar for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep Wrangler JK with a 0" to 6" Lift from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

When lifting your Jeep, it's very important to keep your axis centered for proper suspension geometry. So today we're gonna be installing this TeraFlex front adjustable track bar, fitting a 2007-2017 Jeep Wrangler.

The TeraFlex front track bar is designed to perfectly fit your Jeep and will replace the factory track bar, whether your Jeep is at stock ride height or has up to a six inch lift. It's made of durable forged steel so it's stronger than the factory bar for improved handling and control and will maintain proper suspension geometry. So today we're gonna install it on our 2008 Jeep Wrangler.

Tools you'll need for this installation: a lift and pull jack or a jack and jack stands, half inch ratchet, 21 millimeter socket and extension, 21 millimeter wrench, and a pair of channel locks or an adjustable wrench.

Before we begin the installation, we're going to support the axle with a pull jack just for safety. Okay, so you're ready to remove the factory track bar, which is right here. All you should need to remove is a 21 millimeter wrench and socket. Remove the lower bolt. Now for the upper bolt. Then remove the bolt and the entire bar itself.

Alright, we have the factory track bar off and here's a side by side comparison of the TeraFlex and the OEM bar. As you can see, the TeraFlex is much larger than the factory bar and it looks a lot better too. And it's fully adjustable here. We don't need to adjust this, actually it comes out of the box at the factory line and we don't have a lift on our Jeep so that's where we're keeping it. But if you do need to adjust yours and make it longer, just loosen these two nuts right here and turn this turn buckle to extend it.

We're ready now to install this into the Jeep. We're going to first mount this portion of the track bar into the frame mount. Slide it into the mount and install it with the factory hardware. Get the factory nut on there. And we can move down to the axle mount. And once again secure it reusing the factory hardware. Get the factory locking nut on there. And you can snug it up but don't fully tighten up just yet. We're gonna wait to fully tighten these bolts when the Jeep is on the ground. Same thing with the top mount, you can snug this up but don't make it tight just yet.

If you happen to extend this track bar to make it easier to install, make sure that you shorten up the track bar again and then get it properly aligned once you finish the installation. And simply by twisting this turn buckle, you'll shorten the bar right up.

Okay, now we have the Jeep on the ground, we're gonna tighten up these track bar bolts and then our installation's finished.

All right, we've got our TeraFlex front adjustable track bar installed, its way bigger and looks so much better than the factory track bar. And it's super easy to adjust, which is really nice. And installation shouldn't take you more than an hour. And before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.