Looking for a kit that will give you the basic parts you need to lift your 2018-2021 4-door Jeep JL Wrangler 3-1/2 inches? Then pick up this TeraFlex 3-1/2" Coil Spring Base Lift Kit without Shocks that’s now available from CJ Pony Parts!
Features & Benefits:
- Lifts Jeep 3-1/2"
- Includes Basic Parts Needed to Fit Larger Tires for Increased Ground Clearance and Better Off-Road Capability
- Will Not Compromise or Sacrifice On-Road Handling
- Engineered with Drivability and Performance in Mind
- Properly Developed Suspension Geometry, Roll Center and Load Tuning Ensure All Factory Stability Controls Remain Functional and Within Parameters Jeep Originally Engineered
- Fits All 2018-2019 4-Door Jeep JL Wranglers
- Install Time: Approximately 5 Hours
- Made in the USA
This TeraFlex (1355000) 3-1/2" Coil Spring Base Lift Kit without Shocks comes with the basic parts you need to fit larger tires for increased ground clearance and better off-road capability. This kit won’t sacrifice or compromise on-road handling, and it’s engineered with both drivability and performance in mind. This kit’s properly developed suspension geometry, roll center and load tuning ensure that all of your Jeep’s factory stability controls remain fully functional and within the parameters that Jeep originally engineered.
Max Tire Diameter:
- Sport | Sahara (with 3" front and 2.5" rear bump stops): 35"
- Rubicon (with 2" front and 2" rear bump stops): 35"
- Rubicon (with 2.5" front and 3" rear bump stops): 37"
This Kit Includes:
- 3-1/2" Lift Coil Springs
- Front Track Bar Bracket (TeraFlex P/N# 1953500)
- 2" Front and Rear Bump Stop Strike Pad Kit (CJ Pony Parts P/N# 1959500)
- 1/2" Front and Rear Bump Stop Strike Pad Shim Kit (TeraFlex P/N# 1959300)
- Pair of Longer Front Sway Bar Links (11-1/2")
- Pair of Longer Rear Sway Bar Links (10-3/4") (TeraFlex P/N# 744500)
- Pair of Front Brake Line Anchors (CJ Pony Parts P/N# 1101255)
- All Necessary Hardware
*Sport and Sahara models require aftermarket wheels with 4.5" backspacing or less – or offset wheel adapters for stock wheels – NOT included.
*Models with plastic bumpers require removal of bumper to fender wind deflector/splash guards in order to fit 35" or larger tires.
*Sport/Sahara models require the INCLUDED 0.5" front and 0.5" rear bump stop strike pad shims in order to fit 35" tires.
*Rubicon models require the INCLUDED 0.5" front and 0.5" rear bump stop strike pad shims in order to fit 37" tires.
*JL/JLU: Front Control Arm Sport Brackets (CJ Pony Parts P/N# 1938125) recommended to optimize caster and pinion angles.
*Requires longer shocks (not included in base kit) – 23-1/2" Lift Falcon Series 2.1 Monotube (CJ Pony Parts P/N# 110121400200), 24-1/2" Lift Falcon Series 3.1 Piggyback (CJ Pony Parts P/N# 110131400200), or 24-1/2" Lift Falcon Series 3.3 Fast Adjust Piggyback (CJ Pony Parts P/N# 110133400200) shock absorbers.