Teraflex Coil Spring Lift Kit Base 4-1/2" Without Shocks Jeep Gladiator 2020-2023

TeraFlex:
1366000

Highlights

  • 4-1/2" Lift Height
  • 37" To 38" Max Tire Clearance
  • Hardware Included
  • Made in the USA
MSRP $771.99
$763.99
You save $8.00

Teraflex 4-1/2" Base Coil Spring Lift Kit without Shocks for 2020-2023 Jeep Gladiators.

Elevate your 2020-2023 Jeep Gladiator by 4-1/2 inches for that aggressive offroad stance you've always wanted. Although it doesn't offer the drivability of a full suspension system, the Teraflex Base Coil Spring Lift Kit (1366000) provides all the essentials for a first-rate lift and extra tire clearance. 

Features and Benefits:
- Provides a 4-1/2 Inch Lift
- Additional Tire Clearance
- Comes with Essential Lift Components
- Aggressive Offroad Appearance 

One of the greatest advantages of a lift kit is the ability to run large aftermarket tires. The maximum tire size for Sport/Overland fenders is 37 inches and will require the use of four-inch front Bump Stop/Strike Pad Extensions/Shims. The maximum tire size for Rubicon fenders is 38 inches and will require the use of three-inch Rear Bump Stop/Strike Pad Extensions/Shims. 

Kit Includes: 
- 4.5” Lift Coil Spring Kit 
- Front Track Bar Axle Bracket (4.5-6” Lift)
- 2” Bump Stop Strike Pad Extensions – Front Lower x 2
- 0.5” Bump Stop Strike Pad Shims – Front Lower x 4
- 1.5” Bump Stop Extension Kit – Rear Upper
- 0.5” Bump Stop Shim Kit – Rear Upper
- 0.5” Bump Stop Strike Pad Shim Kit – Rear Lower
- 11.5” Front Sway Bar Link Kit with Swivel Stud (2.5-4.5” Lift)
- 13” Rear Sway Bar Link Kit with Swivel Stud (2.5-4.5” Lift)
- All Necessary Hardware

The Base Coil Spring Lift Kit does not come with shocks, but Falcon Performance Shocks can be purchased separately to support your Jeep's stability. These shock absorbers are the most suitable choice since they are the only shocks engineered to improve both compression and rebound on Teraflex Coil Spring Lift Kits. You'll also need front and/or rear Sport Brackets, or adjustable short or long control arms, and/or adjustable front and/or rear track bars to correct suspension geometry.

Vehicle Fitment:
- Jeep JT Gladiator (Pickup)
- Sport/Overland Fenders: 37” Max Tire Diameter 
- Rubicon Fenders: 38” Max Tire Diameter 
- Aftermarket Wheels with 4.75-inch Backspacing or Less
- Offset Wheel Adapters (# 1057000) for Stock Wheels (Not Included)

*EcoDiesel models require One-Inch Lift Front Coil Spring Spacer Kit (# 1155100), sold separately.

Tech Tips: 
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35-inch or larger tires.
- Caster correction is required, but not included. Recommended components: Sport Bracket Kit(s) (Front: # 1938125), or adjustable 8-Arm Short Control Arm Kit (Alpine: # 1417500 or Alpine IR: 1417550), and/or HD Forged Adjustable Track Bar(s) (Front: # 1753420).

Additional Notes: 
- Alignment required.
- The following bump stops are required: 1.5” Front Upper, 2.5” Front Lower, 2.5” Rear Upper and 0.5” Rear Lower. 
- Requires longer shocks (not included) – Falcon Performance Shocks recommended.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Gladiator years:

  • 2020,
  • 2021,
  • 2022,
  • 2023,
Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account