TeraFlex Coil Spring Lift Kit Sport ST3 3-1/2" Without Shocks 4-Door Jeep Wrangler JL 2018-2019

TeraFlex:
1513000
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 144.93ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$1,119.99

TeraFlex Sport ST3 3-1/2" Coil Spring Lift Kit without Shocks for 2018-2019 4-Door Jeep JL Wranglers.

If you’re looking for a way to give your 2018-2019 4-Door Jeep JL Wrangler a 3-1/2" lift so you can install larger tires and take it off-roading, it’s time to pick up this TeraFlex Sport ST3 3-1/2" Coil Spring Lift Kit without Shocks that’s now available from CJ Pony Parts! 

Features & Benefits:
- Lift Height: 3-1/2"
- Delivers True Street and Trail (ST) Performance
- Positive, Responsive Handling with Reduced Noise, Vibration and Harshness (NVH)
- Delivers Performance and Capability in Dependable, Maintenance-Free Package with Zero Worries
- Works Well Off-Road or On-Road
- Builds on 2-1/2" Sport ST2 by Replacing Front Lower Sport Flexarms with Front Control Arm Sport Brackets and by Adding Front Track Bar Bracket and Set of Front Brake Line Anchors
- Additional Components Increase Ground Clearance without Compromising On- and Off-Road Prowess
- No Alignment Needed Thanks to Front Control Arm Sport Brackets that Optimize Correct Caster Angle and Restore Factory Geometry for 2-1/2" to 4-1/2" Lift
- Front Track Bar Bracket Corrects Steering Geometry to Eliminate Bump Steer and Other Steering Issues for 2-1/2" to 3-1/2" Lift Kits
- Falcon Progressive Bump Stops Provide Progressive Compression During High-Speed Suspension Movement
- Full Range of Movement for Off-Road Flex and Articulation
- Install and Drive: Simple Bolt-On Installation with No Welding Required
- Installation Time: 10 Hours
- Made in the USA 

This TeraFlex (1513000) Sport ST3 3-1/2" Coil Spring Lift Kit without Shocks is a great choice for those who take their Wranglers off-roading but still use it regularly on the road too. This kit builds on TeraFlex’s 2-1/2" Sport ST2 Kit by replacing the front lower sport flexarms with front control arm sport brackets and by adding a front track bar bracket and a set of front brake line anchors. These additional components increase your Jeep’s ground clearance without compromising any of its on- and off-road prowess! No alignment will be required after you’re done with the installation thanks to the front control arm sport brackets that are designed to optimize the correct caster angle and restore factory geometry. 

Max Tire Diameter:
- Sport | Sahara (w/ 3" front & 2.5" rear bump stops): 35"
- Rubicon (w/ 2" front and rear bump stops): 35"
- Rubicon (w/ 2.5" front and 3" rear bump stops): 37" 

This Kit Includes:
- 3-1/2" Lift Coil Springs
- Pair of Front Control Arm Sport Brackets (CJ Pony Parts P/N# 1938125)
- Front Track Bar Bracket (TeraFlex P/N# 1953500)
- Four (4) Falcon Progressive Bump Stops (TeraFlex P/N# 1959200)
- 2" Front and Rear Bump Stop Strike Pad Kit (CJ Pony Parts P/N# 1959500)
- 0.5" Front and Rear Bump Stop Strike Pad Shim Kit (TeraFlex P/N# 1959300)
- Pair of Longer Front Sway Bar Links (11-1/2")
- Pair of Longer Rear Sway Bar Links (10-3/4") (TeraFlex P/N# 744500)
- Pair of Front Brake Line Anchors (CJ Pony Parts P/N# 1101255)
- All Necessary Hardware 

*Sport and Sahara models require aftermarket wheels w/ 4.5" backspacing or less – or offset wheel adapters for stock wheels – NOT included.
*Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tires.
*Sport/Sahara models require the INCLUDED 0.5" front and 0.5" rear bump stop strike pad shims in order to fit 35" tires.
*Rubicon models require the INCLUDED 0.5" front and 0.5" rear bump stop strike pad shims in order to fit 37" tires.
*Requires longer shocks (not included) – we recommend 2-3.5" Lift Falcon Series 2.1 Monotube (CJ Pony Parts P/N# 110121400200), 2-4.5" Lift Falcon Series 3.1 Piggyback (CJ Pony Parts P/N# 11013400200), or 2-4.5" Lift Falcon Series 3.3 Fast Adjust Piggyback (CJ Pony Parts P/N# 110133400200) shock absorbers. 

Please Note: This kit does NOT include shocks. We recommend Falcon shock absorbers for superior performance. Falcon shocks and TeraFlex coil springs have been designed to work together to improve both compression and rebound for optimal vehicle stability. 

Order a TeraFlex (1513000) Sport ST3 3-1/2" Coil Spring Lift Kit without Shocks for your 2018-2019 4-Door Jeep JL Wrangler from CJ Pony Parts today!

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.77ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 119.36ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;