If your passion is off-roading in your brand new 2020-2021 Jeep Gladiator, then you need a suspension system to up the ante. The TeraFlex Alpine RT2 2-1/2" Lift Kit 2032033 With Falcon SP2 3.3 Shocks and SpeedBump equips your rig with a smooth ride and improved handling for every bump and turn you encounter. With this suspension kit, you can enjoy every off-road experience without noise, vibration and harshness normally attributed to lifted suspension!
This TeraFLex lift kit includes adjustable Alpine IR Short Control Arms and IR (Independent Rotation) Bushings for quiet and exceptional ride quality. Forget about binding problems! These bushings prevent binding for unrestricted droop and a comfortable ride at full suspension.
Overall, your ORV will profit greatly from what this control arm kit has to offer, including improved anti-squat geometry and tire position. The long and short control arms optimize rear pinion angles and balance front caster and pinion angles for improved performance. Brake dive and acceleration squat are ultimately reduced with these corrections.
Features and Benefits:
- Adjustable Alpine IR Short Control Arms Balance Caster and Pinion Angles and Create Correct Suspension Alignment
- Alpine IR Short Control Arms made of 42mm x 4mm wall DOM Tube for Strength
- Hardened Bearing Surface on Rotating Sleeve for Durability
- Superior NVH Damping and Reduced Bushing Bind
- Direct Replacement Control Arm Bushings Provide 360-Degree Rotation at Full Droop
- Improved Ride Quality in All Terrain
- Lubricated and Sealed Maintenance-Free IR Bushings
- Adjustable Alpine IR Front Track Bar and Front Track Bar Bracket (3.5”+) Offers Unrivaled Handling and Steering Response
- Front SpeedBump Bump Stops and Rear Progressive Bump Stops Compress During High-Speed Suspension Movement
- Optimized Off-Road Flex and Articulation
- Easy Bolt-On Installation
*Max Tire Diameter for Sport/Overland Fenders: 35” Tires
*Max Tire Diameter for Rubicon Fenders: 35” Tires
Since handling is everything on rough trails, the adjustable Alpine IR front track bar and bracket are here to reduce body roll and enhance steering response for a stable ride. Cushion yourself and your Jeep from harsh impacts with the SpeedBump bump stops included in the kit.
- 2.5” Lift Front Coil Springs
- 0.5” Lift Rear Coil Spring Spacers
- 8-Arm Alpine IR Short Control Arm Kit
- Alpine IR Front Track Bar
- (4) SpeedBumps and (4) Progressive Bump Stops
- Front Sway Bar Quick Disconnect Kit
- 13” Rear Sway Bar Link Kit
- Front Brake Line Anchor Kit
- Falcon SP2 3.3 Fast Adjust Piggyback Shocks (2-3” Lift)
- All Necessary Hardware
- Requires aftermarket wheels with 4.75-inch backspacing or less. Or, instead, use Offset Wheel Adapters for stock wheels (NOT INCLUDED).
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35-inch or larger tires.
- All OEM fenders require 2-inch front and 1-inch rear bump stop extensions in order to fit 35-included tires. Bump Stop extensions are INCLUDED with kit.
- Alignment required.