TeraFlex Replacement CV Joint Kit High-Angle Jeep Wrangler JK 2007-2018

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 127.67ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • High Angle CV Housing
  • Includes Low-Friction Grease
  • Performance Upgrade
  • Easy Installation

TeraFlex High-Angle Replacement CV Joint Kit for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Looking for a way to replace the worn or damaged factory Rzeppa CV joint or driveshaft on your 2007-2018 Jeep JK Wrangler without having to resort to an expensive aftermarket U-joint upgrade? Then pick up this TeraFlex High-Angle Replacement CV Joint Kit that’s now available at CJ Pony Parts! 

Features & Benefits:
- Replaces Worn or Damaged Factory Rzeppa CV Joints and Driveshafts without Resorting to Expensive Aftermarket U-Joint Upgrade
- High-Angle CV Housing Reduces Boot Failure Common with 3" or More Lift Heights
- Includes Low-Friction Grease Specifically Engineered for High RPM Needs of JK Rzeppa CV Joint
- High-Viscosity Surface Bonding Characteristics Needed to Properly Adhere Grease to All Moving Surfaces
- Works on All 2007-2018 2- and 4-Door Jeep JK Wranglers 

This TeraFlex (1744014) High-Angle Replacement CV Joint Kit will help reduce boot failure that’s common with 3" or more lift heights. It comes with low-friction grease that’s specifically engineered for the high RPM needs of JK Rzeppa CV joints. The low-friction grease has high-viscosity bonding characteristics that are needed to properly adhere to all of the moving surfaces! 

Please Note: Proper grease packing of the joint is essential for joint longevity. Be generous and use all grease that’s provided. Improperly packing the bearings without sufficient grease will result in bearing failure. 

This Kit Includes:
- CV Joint Assembly
- High-Angle CV Housing Cap and Boot
- Bolt Flanges
- Socket Head Bolts
- 6mm Allen Wrench
- Low-Friction CV Grease 

For over 20 years, the fine folks at TeraFlex have produced some of the finest Jeep Wrangler parts and accessories on the market. TeraFlex has evolved with the times, and offers everything that Jeep Wrangler owners need in order to live out all of their fantasies on the trail. If you are searching for top-of-the-line Wrangler products, look no further than TeraFlex. 

Order a TeraFlex (1744014) High-Angle Replacement CV Joint Kit for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty


Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Wrangler years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.06ms
  • bvseo-msg: HTTP status code of 404 was returned;

is it the same for both front and rear drive shafts ?

Asked by: HAKAM
Yes this is the same for both driveshafts, front and rear.
Answered by: Matt CJOR
Date published: 2020-04-01
  • y_2020, m_4, d_2, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1744014, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 30.96ms
Complete Your Package
Add to Cart