Total Control Products G-Bar Upper Control Arm Bracket Welding Fixture 8"/9" Rear End 1965-1973
- G-Bar Welding Fixture
- Positions Upper Arms To Axle
- Easy To Use Fixture
- For 8" And 9" Rear Ends
Total Control Products G-Bar Upper Control Arm Bracket Welding Fixture for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with an 8" and 9" Rear End.
When ordering a G-Bar Rear Suspension Kit from Total Control Products, this upper control arm bracket welding fixture is highly recommended. The idea of this bracket fixture is to properly align the upper control arm brackets to the axle tubes. The fixture bracket gets mounted on the upper axle housing studs. This G-Bar fixture bracket will work on all 1965-1973 Mustangs with an 8" or 9" rear end.
Features & Benefits:
- Accurately Positions Upper Control Arm Brackets to Axle Tubes
- Works with all Total Control Products Rear 4-Link Suspensions
- Easy-to-Use Fixture Bracket
- Designed to Work with 8” and 9" Rear Ends
The bracket is constructed from a heavy gauge steel that is bent in a 90 degree angle which provides a strong straight edge for proper fitment of the upper control arm brackets. Total Control Products fixture arms are drilled and threaded to accept two cone style screw on either end of the bracket. The fixture arms have the same exact size holes as the upper control arm bolts making the bracket rigid for installation purposes.
So order this Total Control Products G-Bar Upper Control Arm Bracket Welding Fixture for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with an 8" or 9" Rear End from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Intermediate skill is required for this installation.