Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With Small Block Engine Mounts 1967-1970
- Full Length Subframe Clip
- For Ford Small Block Engines
- Shock Tower Delete Panels
- Rack & Pinion Crossmember
Total Control Products Full-Length Subframe Clip for 1967, 1968, 1969 and 1970 Mustangs with a Tubular Sway Bar and Small Block V8 Engine Mounts.
If you plan to do a high-performance engine build in your 1967-1970 Ford Mustang, then you should consider this direct-fit (TCP KCST2-1) Total Control Products Full-Length Subframe Clip. One of the benefits of this factory-welded subframe clip is the deletion of the original shock towers, which will create extra space for your small block V8 engine. Also highlighted in this kit is a g-Machine double A-arm, rack and pinion crossmember.
- Factory-Welded Full-Length Subframe Clip
- Shock Tower Delete Panels
- G-Machine Double A-Arm, Rack and Pinion Crossmember
Please Note: If you have a 289, 302 or 351W Engine a Rear Sump Oil Pan is required.
Features and Benefits:
- Stronger Than Factory Frame Rails
- Extra Room in Engine Compartment
- Interlocking Slot Tab Technology
*Does NOT include a sway bar but does have mounts on the frame for a tubular sway bar.
*Does NOT include engine mounts but does have frame mounts for Small Block V8 Engine mounts.
Please Note: The Total Control Products Subframe Clips will require the use of Total Control Products Front Suspension Components. Other brand suspension components will Not work on this Total Control Products Front Clip.
This (TCP KCST2-1) factory-welded full-length subframe clip is ideal for Mustang builds packing a lot of power. This subframe clip has fully boxed rails with heavier wall thickness than stock, offering improved rigidity. This subframe clip extends the entire length of the front frame rails.
The included recessed-pocket steel shock tower delete panels will clear up space under the hood of your 1967-1970 Mustang for your choice of either an early or late model small block V8 engine. For your convenience, the panel edges are pre-drilled for rosette welding to stock inner fenders.
The included crossmember has a bent-tube, billet-component design. It is a totally closed, firm structure with greater strength and resistance bending and twisting than other crossmembers. Composed of steel tubing, there are large-radius mandrel bends at each side that will distribute loads throughout the crossmember. This will eliminate fatigue points at critical areas. Additionally, slots for the billet-mount tabs are machined in a horizontal machining center with dedicated fixturing to ensure proper component geometry that will in turn ensure a proper functioning suspension.
Self-fixturing female slots used with machined male tabs provide an interlocking assembly method that enables A-arm, rack and pinion, and shock mounts to be accurately positioned in all axes. This will ensure that your suspension will properly perform. Non-interlocking designs are not nearly as accurate after welding. The premium spray-arc welding process utilized on this product creates the best weld penetration with excellent appearance.
Order this Total Control Products Full-Length Subframe Clip for your 1967, 1968, 1969 or 1970 Mustang with a Tubular Sway Bar and Small Block V8 Engine Mounts from CJ Pony Parts today!
California Residents: Proposition 65 Warning