Ford Performance Transmission Tremec 5-Speed Extra HD 0.68 5th Gear

Ford Performance:
M-7003-R58H

Highlights

  • 600 Lb. Ft. Torque Capacity
  • Aluminum Housing
  • Heavy Duty Internals
  • Close Ratio 1-4/ Wide Ratio 5
MSRP $3,195.00
$2,699.99
You save 15%

Ford Performance 5-Speed Extra HD Tremec Transmission with a 0.68 5th Gear Ratio.

Making too much power? Is your Mustang breaking stock T5 transmissions? Upgrade to a Ford Performance 5-Speed Extra HD Tremec Transmission. This is a reinforced version of the older HD Tremec 5-speed, which was used in the 1995 Cobra R.

Features and Benefits:
- Race Ready Design
- 600lb-ft Torque Capacity
- Reinforced Steel Gears
- Close Ratio 1-4, Wide Ratio 5th

The Extra HD Tremec Transmission features improved cast iron shift forks, a one-piece counter-shaft, and gears made of 4615 steel which increases torque capacity up to 600 lbs./ft. It uses a close gear ratio from 1st through 4th with a 0.68 5th gear ratio and is equipped with a 26 spline input shaft and a 31 spline output shaft. The case is constructed from strong OE quality aluminum for lasting durability.

Gear Ratios:
- First Gear: 2.87
- Second Gear: 1.90
- Third Gear: 1.34
- Fourth Gear: 1.00
- Fifth Gear: 0.68

Tech Tip: Ford Racing's 5-Speed Extra HD Tremec Transmission can be used in 4.6L Mustangs when equipped with Ford Racing's bellhousing (M-6392-M46) and 11" clutch kit (M-7560-T46).

Additional Notes:
- For all applications, this Ford Performance 5-Speed Extra HD Tremec Transmission requires the use of a unique 10.5" clutch disc (M-7550-T302) designed for a 26 spline input shaft, and the use of a 31 spline driveshaft yoke. M-4841-A is recommended from Ford Performance.

- A Ford Performance bellhousing (M-6392-R58) is required to install the 5-Speed Extra HD Tremec Transmission in a 1979-1995 Mustang. For installation in all 1979-1993 Mustangs, Ford Performance's adjustable crossmember (M-5059-A) must be used, 1979-1981 Mustangs will require some modifications. For installation in all 1994-1995 Mustangs, modifying the crossmember, lengthening the driveshaft by .625" and the use of clutch fork (E6ZZ-7515-A) is required.

- Tremec recommends using Synchromesh fluid.

California Residents: Proposition 65 Warning

Vehicle Fitment

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.