Manipulate your lighting with ease thanks to this innovative Trigger 6 Channel Combo Kit With Overhead Remote Mount For 2011- 2018 Jeep JK Wranglers. This product from Trigger is a power distribution system built specifically for your off-road vehicle and operates as an accessory used to connect and control other 12-volt accessories. The connection is simple with one go-between area to your vehicle and 6 fuse-protected outputs.
The free mobile application from Trigger allows customers to turn circuits on & off, activate flashing modes, or even adjust the brightness of connected lighting. Each purchase is equipped with an on-board battery voltage monitor that conveys data to the application. The app also allows consumers to oversee battery levels, set low voltage notifications, or even personalize the built-in low voltage cut-off level. To control other varied accessories, the Trigger app settings provide the option for individuals to set the product to either 'toggle' or 'momentary' modes.
Features and Benefits:
- 6 channels, 2 x 30 amp, 2 x 10 amp, and 2 x 5 amp circuits
- RF Remote with rocker-style switches usable inside or outside the vehicle
- Bluetooth control using our iOS and Android mobile app
- Manual buttons for individual circuit power on top of the control box
- Built-in DIN connector for use of conventional toggle switches (harness sold separately)
- Low voltage cut off will shut down the 6 Shooter if the battery voltage gets too low
- 100 amp fuse installed on positive input wire for whole system protection
- Six 12-24 volt output harnesses with pre-installed waterproof connectors
- Built-in fuses with o-ring sealed cover: two 30 amp, two 10 amp, two 5 amp
- High intensity LED’s indicate circuit status, blue for the circuit on, red for a blown fuse
- Waterproof case design withstands temps from below freezing to 250 degrees F
- 12 to 24-volt input, 3 wires, ground, switched positive, battery positive
To ensure your installation process is as simple as possible, the trigger overhead mount for the RF remote is created to have a "no tools" procedure. The mount given both enhances your equipment to have a custom look while making the rocker switches easy to reach. Built to fit directly between the battery and the inner fender sheet metal of your JK, Trigger also provides an underhood controller bracket complete with a hassle-free installation. Purchase this Trigger 6 Channel Combo Kit With Overhead Remote Mount from CJ Pony Parts today to maneuver your lighting with a user-friendly control unit.
Please Note: Not all lights are compatible with the mobile application.