Trunk Weatherstrip Coupe/Convertible 1965-1970

CJ's Part Number:
WSTR1
Trunk Weatherstrip Coupe/Convertible 1965-1970 is rated 3.8 out of 5 by 13.
  • y_2019, m_10, d_16, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_WSTR1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 29.34ms
  • REVIEWS, PRODUCT

Highlights

  • Direct-Fit Replacement
  • High Quality Rubber
  • Seals Against Dirt And Debris
  • Prevents Costly Water Damage
MSRP $9.99
$8.99
You save 10%

Trunk Weatherstrip for all 1965, 1966, 1967, 1968, 1969 and 1970 Coupe and Convertible Mustangs.

Are the elements somehow damaging the trunk interior of your 1965-1970 Mustang coupe or convertible? CJ Pony Parts recommends checking your weatherstripping. Changing out dried, cracked, warped or missing weatherstripping on your coupe or convertible is great preventive maintenance to keep harsh weather from ruining your classic pony's interior trunk presentation.

Trunk Weatherstripping Features and Benefits:
- Direct-fit replacement
- Identically matches the factory original
- Individually sold
- Composed of high end material

This is an OEM original style direct-fit replacement that seals the trunk lid when closed, eliminating water from leaking into the trunk compartment. This weatherstrip will protect your pony's trunk from rain, snow and wind, preventing you from spending thousands on costly repairs. If you've just painted your classic Mustang, than the hardest part is already done and you just need to apply adhesive and press this on!

Installing on the underside of the trunk of your pony, this weatherstripping is individually sold, fitting in the factory location and acting as a direct fit replacement on your classic Mustang.

Please Note: Requires super weatherstrip adhesive for installation (sold separately).

Please Note: This Coupe/Convertible Trunk Weatherstrip will not work on 1969-1970 Shelby Convertible Mustangs.

CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this Trunk Weatherstrip for your 1965, 1966, 1967, 1968, 1969 or 1970 Coupe or Convertible Mustang from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 2 out of 5 by from Too thick I bought this based on reivews. Installed easily and based on comments I've read, I adjusted the lid and let it be for over a week thinking that it might compress. I see no change at all. The fit is just not good and I'm planning to remove in favor of another made from softer material (or OEM if I can locate that).
Date published: 2015-09-10
Rated 1 out of 5 by from TOOOOO THICK Uncompressed, this WS is about 3/4" thick and it just doesn't compress enough. Trunk fit perfectly before installing it and now it's up 1/4" high on the sides. Adjustment can reduce this, but causes a bad fit in other areas. I'm planning on taking it out and installing a hollow "D" section.
Date published: 2015-11-24
Rated 5 out of 5 by from Just an update for 2017 I read the reviews and started to freak a little as I read them after I ordered. This is my first Mustang and first attempt at putting one back together so I thought if anyone had a problem it would be me. No worries, fits great even though I painted over the lines that marked the old one and forgot just exactly how it went on, just kept in mind what it was suppose to do. It wasn't too thick, it wasn't too short- about 6 inches too long.
Date published: 2017-09-05
Rated 4 out of 5 by from Works good I bought this weatherstrip for my 64.5 coupe and my paint and body guy installed it. said it was easy but didn't come with glue. he also installed it on the bottom side of the trunk instead of the underside of the trunk lid like in the CJP picture. it still works either way but having the glue with it would have been excellent. over all, good buy
Date published: 2019-06-25
Rated 5 out of 5 by from fits well look at the picture closely. This mounts on the trunk not the seam around it. Best bet pull the trunk off, turn upside down and glue. No directions with this but it is simple to remove 4 bolts and get it attached right.Buy the glue as well.
Date published: 2015-06-10
Rated 5 out of 5 by from High Quality Bought and installed on my '65 coupe. Removing the lid made removal of the old part, painting the underside of the lid, and installing new part much easier. Fit well with about 6" to spare. Easily trimmed to fit.
Date published: 2018-09-13
Rated 5 out of 5 by from Excellent fit! I bought this to replace a weatherstrip purchased elsewhere. The other product was much too thick. This fit perfectly and installation was fast and simple. Wish I had done this the first time :-)
Date published: 2015-03-25
Rated 5 out of 5 by from Truck weatherstrip Perfect fit and a must for any restoration. I also purchased the front windshield and doors to complete the weather stripping replacement
Date published: 2017-08-30
  • y_2019, m_10, d_16, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_WSTR1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.78ms
  • REVIEWS, PRODUCT

is this weatherstrip suppose to sit on the seam when the truck is shut

Asked by: freddy 1
I see now that it was not for my 2000 Mustang, my mistake I am sure/
Answered by: EricTerri
Date published: 2019-02-13

I bought trunk weatherstrip for a '64 Mustang coupe. It measures 128", but trunk is ~140" around. Am I to stretch it that much? Seems pretty tight when I do.

Asked by: SteveJ
No you shouldn't have to stretch it, it should be long enough that you have to trim some off the end. please call and talk to one of the customer care reps toll free at 1-800-888-6473 for assistance.
Answered by: rk cjpp
Date published: 2015-12-07

does this weather strip glue on the trunk lid

Asked by: 65stang
Yes, it uses a specific weatherstrip adhesive, which is part number AD3M
Answered by: CJ Pony Parts
Date published: 2015-02-11

I am having trouble with the trunk seal I currently have. It is too thick and the trunk does close correctly. Of the two brands you carry for the 65 coupe, what is the one that would solve this problem? Thank You

Asked by: GPenna
Both are very similar. Scott Drake's are just a bit higher quality versus the generic product.
Answered by: CJ Pony Parts
Date published: 2015-01-31
  • y_2019, m_10, d_16, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_WSTR1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.04ms
  • QUESTIONS, PRODUCT