The TSW Nurburgring wheel is a one-piece rotary forged aluminum wheel, made to the highest standards of manufacturing. The Nurburgring wheel features seven Y-shaped spokes that extend outwards to the edge of the wheel. Features a Matte Bronze finish that can really complement the exterior of your Mustang. TSW completes the Nurburgring wheel with a matching center cap. An extra thick TSW emblem is used to prevent warping and fading.
This TSW Nurburgring 20" x 8.5" wheel is named after the Nurburgring circuit, also known as "The Ring", which is located in Nurburg, Germany. The 22 km track was built in 1920 and became known as one of the toughest and most dangerous tracks in the world. Jacki Stewart went as far as nicknaming the track "the green hell". Through the 1950s and early 1970s the Nurburgring was the main venue for the German Grand Prix as part of the F1 World Championship. The new Nurburgring Grand Prix Track, called GP-Strecke was completed in 1984 and has hosted several Grand Prix events.
This TSW wheel is manufactured using a highly advanced production technique: Rotary Forging. First, the wheel is molded with a very thick lip section. This lip section is then rolled to form the barrel of the wheel. As the wheel is rolled, the molecular structure of the aluminum is changed which enhances the strength of the alloy. The process allows for a much lighter weight than a regular cast wheel, while increasing the strength. Weight savings is in the outer rim of the wheel which dramatically reduces rotational mass and enhances your Mustang's performance.
TSW wheels are specific for each application. The widths and offsets were designed so this 20" x 8.5" Nurburgring wheel fits all 2005-2014 Mustangs perfectly. Correct sizing is important for proper fitment as well as geometry. An incorrect offset can increase bumpsteer which causes the wheels to turn when coming in contact with bumps. Every TSW wheel is equipped with a special metal centering ring so the wheel fits your Mustang perfectly and vibrations are nonexistent. Although the wheel is lightweight, it is designed to handle the weight of your Mustang and the specific load rating is stamped on the back of the Nurburgring wheel. Also, TSW wheels are specifically designed to be TPMS compatible.
- Size: 20" x 8.5"
- Lugs: 5x114.3mm (5x4.5")|
- Finish: Matte Bronze
- Backspacing: 6.32"
- Offset: +40mm
- Center Caps: Included
Tech Tip: Please see P/N: W748-B if you are looking for a complete Wheel and Tire Package with a square fitment.
- 2005-2014 Mustang V6
- 2005-2014 Mustang GT
- 2007-2014 Shelby GT500
- 2012-2013 Boss 302
- 2015-2017 Mustang V6
- 2015-2020 Mustang EcoBoost
- 2015-2020 Mustang GT
*This wheel is NOT intended for use with 2015-2020 Shelby GT350, GT350R and GT500 model Mustangs.
*This 20" wheel will clear all available brake kits found on any of the 2005-2020 Mustang fitment mentioned in this listing.
*This wheel requires small diameter, tuner style lug nuts. Larger OEM style lug nuts will NOT work.
*Valve stem TPMS compatible (NOT Included). All 2007 and newer Mustangs use tire pressure sensors in each wheel. If you are ordering a wheel and tire package make sure to order a set of sensors to be installed during the tire mounting process. Without sensors, the tire pressure light will be illuminated on the dash.
- It is highly recommended that you have all of the proper equipment necessary so that your vehicle can have a perfect alignment done by a professional in both the front and the rear of your Mustang. You may also find the need for a pair of Steering Rack Limiters depending on the ride height of your Mustang and the tire selection you choose, See P/N: HW3096 for 2005-2014 models and P/N: HW4093 for 2015-2020 models.