Turbosmart Internal Wastegate Actuator 7 PSI Fiesta ST 2014-2019

Turbosmart:
TS-0622-7072
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 145.78ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Direct-Fit Upgrade
  • High Grade Billet Aluminum
  • Stainless Steel Rods
  • Quick Spring Changes
MSRP $153.74
$138.37
You save 10%

Turbosmart 7 PSI Internal Wastegate Actuator for all 2014, 2015, 2016, 2017 and 2019 Fiesta STs.

Looking to upgrade the Internal Wastegate Actuator on your ST? Look no further than Turbosmart's 7 PSI Internal Wastegate Actuator (TS-0622-7072) specifically designed for your 2014-2019 Fiesta ST! This actuator allows for fitment of heavier duty springs and gives you much more control over boost pressure. If you’re looking for a boost curve that comes on faster and stays flat, then pick up this Internal Wastegate Actuator from Turbosmart!

Features and Benefits:
- Direct-Fit Upgrade for Stock Actuator
- Made From High Grade Billet Aluminum Material
- Stainless Steel Rods For Corrosion Resistances
- Silicone Diaphragm With Nomex Reinforcement To Withstand High Temperatures
- Locking Collar Design Cap, Perfect For Quick Spring Changes
- Range Of Springs From 3-26 PSI Base Pressure

This actuator from Turbosmart is resistant to exhaust back pressure to you can expect less of a drop-off at the end of the power curve. With this Internal Wastegate Actuator, you can obtain more boost earlier in the curve and keep it going much longer than your stock setup. It’s really easy to swap springs, so you can easily achieve your desired amount of boost.

Turbosmart has designed this particular wastegate with the highest quality materials and superb engineering that Turbosmart is known for. Internal wastegate actuators provide better turbo response and greater sensitivity when managing boot pressures across the entire curve. Each Turbosmart Internal Wastegate Actuator is adjustable with several spring options and is a direct-fit upgrade for the stock actuator.

Owners of turbocharged cars love the sound of their turbos and the additional power that it creates. However, if these owners leave the EcoBoost in factory condition, there's a lot of power and enjoyment left on the table. With the parts from Turbosmart, you can make some upgrades to your ST, quickly and easily getting a better sounding turbo and more power.

Order a Turbosmart 7 PSI Internal Wastegate Actuator (TS-0622-7072) for your 2014, 2015, 2016, 2017, 2018 or 2019 Fiesta ST from CJ Pony Parts today!

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Videos

Vehicle Fitment

This product will fit the following Fiesta years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 33.94ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

can I run this actuator on the stock tune? I currently I have this actuator running on a custom tune. will it need to be adjusted first?

Asked by: coolshado
It will need adjusted and a custom tune.
Answered by: rk cjpp
Date published: 2019-04-16

What is the real gain or benefit of adding this? I haven't done any mods to my Fiesta ST and I don't really plan on any major mods in the future but I would like to add a little noticeable performance.

Asked by: Tusk505
This actuator allows for fitment of heavier duty springs and gives you much more control over boost pressure.
Answered by: rk cjpp
Date published: 2019-03-26
  • y_2019, m_10, d_21, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_TS06227072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 122.17ms
  • QUESTIONS, PRODUCT