Turn Signal Wiring With Fixed Steering Wheel 1967

CJ's Part Number: TSW3
MSRP: $93.99
CJ's Low Price:
1508284800 33105
Earn 77 RPM Points What's this?
Turn Signal Wiring With Fixed Steering Wheel 1967

Product Description

Turn Signal Wiring for all 1967 Mustangs with a Fixed Steering Wheel.

The turn signals on your 1967 Mustang are some of its most important safety features. They're how you tell other drivers that you need to turn or pull over, so you want to be sure they're working properly at all times. If you've noticed your turn signals aren't working as well as they used to, or if you just installed a new fixed steering wheel, then you should definitely pick up this Turn Signal Wiring from CJ Pony Parts!

This Turn Signal Wiring comes with everything you need to properly wire your 1967 non-tilt steering turn signal set-up. You'll get a wiring harness, a turn signal canceling cam, a built-in horn switch and a built-in hazard switch with your order. It's an excellent reproduction of your old turn signal wiring, and it's a direct fit replacement too. Make sure your turn signals work when you need them the most and get this Turn Signal Wiring today!

This Turn Signal Wiring Includes:
- Wiring Harness
- Turn Signal Canceling Cam
- Horn Switch (Built-In)
- Hazard Switch (Built-In)

Order Turn Signal Wiring for your 1967 Mustang with a Fixed Steering Wheel from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Hood Turn Signal Lights  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Turn Signal Wiring With Fixed Steering Wheel 1967 is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from Good fit I've needed a new turn signal switch system for years, but balked at the pricing - just patched the old one together, and did without emergency flashers. Then I found this one on sale. Installation was easier than I'd expected, and it's working fine.
Date published: 2015-12-18
Rated 4 out of 5 by from As expected Some wires were a lighter gauge than my original. I attached the wire ends to the new block but it wouldn't connect to the old harness (block), they were not lined up perfectly, had to pull all 10 wires loose again, connect the two blocks together first then push wires into connected blocks. A noisy audible "click" when turn signal was put in the full on position, greased plastic arms, no help, other than that works fine.
Date published: 2017-10-01
Rated 5 out of 5 by from Excellent Piece! I went through 3 PAIRS of the Scott Drake Turn Signal Switches before finally breaking down and buying this one. It used to be much more expensive than the SD switch, but now its cheaper and WAY better!
Date published: 2017-06-21
Rated 5 out of 5 by from Perfect fit. Plug and play Installed in less than 10 mins. Worked perfectly with my Painless Wiring Harness. Quality part.
Date published: 2017-07-20
Rated 5 out of 5 by from Fixed multiple problems This was a fast & easy fix now all the lights work & the horn works.
Date published: 2017-09-27
  • y_2017, m_10, d_16, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_TSW3, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.4ms

Product Questions

will the work in a 1966 mustang the one i have in there now doesn't work any more

Asked by: Fred3000
Use this switch for your 66 mustang, http://www.cjponyparts.com/scott-drake-turn-signal-switch-1965-1966/p/TSW24/
Answered by: rk cjpp
Date published: 2016-12-29

little spring loaded copper horn contacts have worn out on mine and the spring popped off. you have any replacement for the 67 mustang? willing to cut wire to install new one

Asked by: marc
Same thing happened on my 67.  I couldn't find an answer on whether or not that contact and spring can be replaced.  Think I'm going to buy the Scott Drake unit.  
Answered by: Red67
Date published: 2015-11-10

Is the Turn Signal Wiring With Fixed Wheel 1967, your part # TSW3, manufactured by Scott Drake?

Asked by: Riney
No, it's not.
Answered by: CJ Pony Parts
Date published: 2015-02-09
  • y_2017, m_10, d_16, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_TSW3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.7ms

You Might Also Like