Velgen Classic5 Wheel 20"X10.5" Matte Silver 2005-2014
Velgen 20" x 10.5" Matte Silver Classic5 Wheel for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.
Are you looking to add a little something to your 2005-2014 Mustang to make it stand out from the rest? Then why not pick up a new set of wheels? This Velgen 20" x 10.5" Matte Silver Classic5 Wheel from CJ Pony Parts is sure to make your Mustang turn heads with its clean, classic 5 spoke design.
As you would guess, the design of the Velgen Classic5 wheel is a bold 5 spoke design with a brilliant matte silver finish. The 5 spokes start with a thick base in the center of the wheel and taper out as they extend to the edge of the wheel. A recessed lip sits behind the spokes to give the wheel some depth and added design. The rear 10.5” Classic5 will feature the deepest concave out of the entire Velgen line up with a mid-concave for the 9” fronts. With a great suspension setup and fitment, this Classic5 wheel will give your S197 a striking new style.
The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around factory 15" Brembo brakes. The Velgen wheel requires a metal hubcentric ring for installation. This ring is included with each wheel.
Tech Tip: We have found that 275/35-20 tires tend to be on the slightly skinny side ONLY on the 20x10.5" Velgen Classic 5 rear wheels. We now offer the 295/35-20 Nitto INVO and Nitto 555 G2 tires which offer a great fit on any 10.5" wheel but are slightly taller than your original sizes. This will require proper adjustment do your speedometer which can be done with many of the handheld tuners on the market today. This may also cause interference issues on cars that are extremely lowered. Correct centering of the rear axle and proper adjustment to your suspension geometry is a must if you choose to have either of the available 295/35-20 Rear Tires installed.
|Size:||20" x 10.5"|
This Velgen wheel requires small diameter, tuner style lug nuts (WHLLN7 and WHLLN8). Larger OEM style lug nuts will NOT work.
Available individually, as a set of four wheels or a set with tires.
Manufacturer Part Number: Classic520X10.5BZ114+45
Velgen manufactures their wheels using a low pressure casting process. This casting process uses positive pressure to push molten aluminum into the mold quicker. Low pressure casting improves the mechanical properties of the wheel for a denser finished product over gravity cast wheels. Low pressure casting has become one of the most common casting processes approved for wheels sold to the OEM market. While low pressure casting has a slightly higher production cost over gravity casting, the end result is a much higher quality product. Once the Classic5 wheel has been manufactured, Velgen puts the wheel through a variety of quality control tests that include radial testing, impact testing and fatigue testing.
*Valve stem TPMS compatible. All 2007 and newer Mustangs use tire pressure sensors in each wheel.
*This 20" wheel will clear the 14" Brembo brakes on 2007-2012 GT500s, 2010-2014 GTs and 2012-2013 Boss 302s as well as the 15" Brembo brakes on 2013-2014 GT500s.
Velgen wheels may not actually make your Mustang gallop any faster, but they will provide a sleek, sporty appearance that will make it look faster and attract plenty of attention from onlookers. CJ Pony Parts is your one-stop source for stunning Velgen Wheels for Mustang models ranging from 2005 to the present. You can rest assured knowing you’re getting high-quality wheels that are free of imperfections and will maintain their striking good looks for many years to come.
Order this Velgen Classic520X10.5BZ114+45 20" x 10.5" Matte Silver Classic5 Wheel for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!