Velgen Classic5 Wheel 20"X9"/20"X10.5" Matte Silver Set V6/EcoBoost/GT 2015-2019
Set of Velgen 20" x 9" and 20" x 10.5" Matte Silver Classic5 Wheels for all 2015, 2016, 2017, 2018 and 2019 V6, EcoBoost and GT Mustangs.
Enhance the look of your 2015-2019 V6, EcoBoost or GT Mustang with set of four Matte Silver Classic5 Wheels from Velgen! Available through CJ Pony Parts, the classic 5 spoke design of this wheel will surely not disappoint you.
As you would guess, the Velgen Classic5 wheel has a bold 5 spoke design with a brilliant matte silver finish. The 5 spokes start with a thick base in the center of the wheel and taper out as they extend to the edge of the wheel. A recessed lip sits behind the spokes to give the wheel some depth and added design. The rear 10.5” Classic5 will feature the deepest concave out of the entire Velgen line up, with a mid-concave for the 9” fronts.
The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around factory 15" Brembo brakes. The Velgen wheel requires a metal hubcentric ring for installation. This ring is included with each wheel.
These Velgen Wheels also require small diameter lug nuts. Larger OEM style lug nuts will NOT work.
Please Note: The TPMS that are included with the Wheel and Tire Packages are intended to be used with LHD (Left-Hand-Drive) North American Spec Mustangs ONLY. They are NOT compatible with RHD (Right-Hand-Drive) Models or Vehicles manufactured for distribution outside of North America.
*Sold as a staggered 20x9 and 20x10.5 Set of Four Wheels.
- Size: 20” x 9” Front/20" x 10.5" Rear
- Lugs: 5 x 114.3
- Finish: Matte Silver
- Backspacing: 6.26" Front/7.52" Rear
- Offset: +32mm Front/+45mm Rear
- Center Cap: Included
Tech Tip: This set of wheels are NOT intended for use with the 2015-2019 Shelby GT350 and GT350R.
Velgen manufactures their wheels using a low pressure casting process. This casting process uses positive pressure to push molten aluminum into the mold quicker. Low pressure casting improves the mechanical properties of the wheel for a denser finished product over gravity cast wheels. Low pressure casting has become one of the most common casting processes approved for wheels sold to the OEM market. While low pressure casting has a slightly higher production cost over gravity casting, the end result is a much higher quality product. Once the Classic5 wheel has been manufactured, Velgen puts the wheel through a variety of quality control tests that include radial testing, impact testing and fatigue testing.
*Valve stem TPMS compatible for all 2015-2019 V6, EcoBoost and GT Mustangs with a tire pressure sensor in each wheel.
*This 20" staggered wheel kit will clear all available brake kits found on any 2015-2019 V6, EcoBoost or GT Mustang.
You can choose the Nitto NT555 G2 Series Ultra-High Performance Street Radial Tires, improved traction, handling and wet braking capabilities will ensure that this tire performs the way you want in the straights, off the line and throughout hard turns. Or you can choose the Nitto Invo which features a large tread blocks on the outer shoulder of the tire increase the amount of surface area contacting the road. This increases both cornering and dry performance. A continuous center rib sits between twin circumferential grooves. The center rib provides continuous contact with the road to increase the tire's stability and rigidity. This rib helps keep traction during hard braking and acceleration.
Purchase a Set of Velgen 20" x 9" and 20" x 10.5" Matte Silver Classic5 Wheels for your 2015, 2016, 2017, 2018 or 2019 V6, EcoBoost or GT Mustang from CJ Pony Parts today!