This Velgen 20" x 9" Satin Bronze VMB9 Wheel features nine state-of-the-art individual spokes with a skinnier design that is reminiscent of competition wheels. The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around factory 15" Brembo brakes on your 2005-2020 Mustang. A slight lip sits just behind the spokes on the barrel. The aluminum monoblock wheels are cast, then sent through three CNC machining stages for a perfect finished product. This wheel is finished with a satin bronze powder coat to create a unique appearance that will work with just about any Mustang.
- Size: 20" x 9"
- Bolt Pattern: 5-Lug
- Satin Bronze Finish
- Backspacing: 6.26"
- Offset: +32MM
- Center Caps Included
- 2005-2014 Mustang V6
- 2005-2014 Mustang GT
- 2007-2014 Shelby GT500
- 2012-2013 Boss 302
- 2015-2017 Mustang V6
- 2015-2020 Mustang EcoBoost
- 2015-2020 Mustang GT
Tech Tip: Available individually or as a set of four with a square fitment. Please see P/N: W928-B for the bundle options that include tires, TPMS, lug nuts and other available wheel and tire package accessories.
*These wheels are NOT intended for use with 2015-2020 Shelby GT350, GT350R or 2020 GT500 model Mustangs.
*Valve stem TPMS compatible for all 2005-2020 Mustangs with a tire pressure sensor in each wheel.
*This 20" wheel will clear all available brake kits found on any of the 2005-2020 Mustang fitments mentioned in this listing.
-This wheel requires small diameter, tuner style lug nuts. Larger OEM-style lug nuts will not work.
- The tire sizes that you can install on these wheels can go from mild too aggressive with the available offset and width. It is highly recommended that you have all the proper equipment necessary so that your vehicle can have a proper wheel alignment done by a professional in both the front and the rear of your Mustang. You may also find the need for a pair of Steering Rack Limiters depending on the ride height of your Mustang and the tires you choose to install, See P/N: HW3096 for 2005-2014 and P/N: HW4093 for 2015-2020 models.
- The Velgen wheel requires a metal hubcentric ring for installation. This ring is included with each wheel.
Like all Velgen wheels, the 20" x 9" VMB9 wheels are low-pressure cast wheels. Low-pressure casting uses positive pressure to move the molten aluminum into the mold quicker. This helps improve mechanical properties and achieve a finished product that is denser than a gravity cast wheel. Low-pressure casting is the most common process approved for aluminum wheels sold to the OEM market and it offers a good value for the aftermarket as well. Although low-pressure casting has a slightly higher production cost over gravity casting, it allows for a higher quality product. After the VMB9 wheel is manufactured, it is put through a series of tests including radial testing, impact testing and fatigue testing. Velgen's quality control service ensures their wheels emerge with no imperfections.