Velgen VMB9 Wheel 20"x9" And 20"x10.5" Matte Gunmetal Set V6/EcoBoost/GT 2015-2019
Set of Four Velgen 20" x 9" and 20" x 10.5" Matte Gunmetal VMB9 Wheels for all 2015, 2016, 2017, 2018 and 2019 V6, EcoBoost and GT Mustangs.
The Mustang wheel market isn't very big outside the world of replica wheels unless you're looking to spend a few thousand for a custom set of wheels. Velgen Wheels is filling that void with their VMB9 style wheels.
This set of four 20" x 9" and 20" x 10.5" VMB9 wheels features 9 spokes. The spoke styling is similar to the VMB8 wheel, but the VMB9 has a larger number of spokes. The spokes are also skinnier and reminiscent of competition wheels. A slight lip sits just behind the spokes on the barrel. The aluminum monoblock wheels are cast, then sent through three CNC machining stages for a perfect finished product. These wheels are finished with a matte gunmetal powder coat and a stylish center cap features Velgen's name for each wheel.
The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around the factory 15" Performance Pack Brakes found on the new 2015-2019 GT Mustangs. These Velgen wheels require a metal hub centric ring for installation. This ring is included with each wheel.
These Velgen Wheels also require small diameter lug nuts. Larger OEM style lug nuts will NOT work.
Please Note: The TPMS that are included with the Wheel and Tire Packages are intended to be used with LHD (Left-Hand-Drive) North American Spec Mustangs ONLY. They are NOT compatible with RHD (Right-Hand-Drive) Models or Vehicles manufactured for distribution outside of North America.
*Sold as a staggered 20" x 9" and 20" x 10.5" Set of Four Wheels.
- Size: 20” x 9” Front/20" x 10.5" Rear
- Lugs: 5 x 114.3
- Finish: Matte Gunmetal
- Backspacing: 6.26" Front/7.52" Rear
- Offset: +32mm Front/+45mm Rear
- Center Cap: Included
Tech Tip: This set of wheels are NOT intended for use with the 2015-2019 Shelby GT350 and GT350R.
Like all Velgen wheels, the 20" x 9" and 20" x 10.5" VMB9 wheels are low-pressure cast wheels. Low-pressure casting uses positive pressure to move the molten aluminum into the mold quicker. This helps improve mechanical properties and achieve a finished product that is denser than a gravity cast wheel. Low-pressure casting is the most common process approved for aluminum wheels sold to the OEM market and it offers a good value for the aftermarket as well. Although low-pressure casting has a slightly higher production cost over gravity casting, it allows for a higher quality product. After the VMB9 wheel is manufactured, it is put through a series of tests including radial testing, impact testing and fatigue testing. Velgen's quality control service ensures their wheels emerge with no imperfections.
*Valve stem TPMS compatible for all 2015-2019 V6, EcoBoost and GT Mustangs with a tire pressure sensor in each wheel.
*This 20" staggered wheel kit will clear all available brake kits found on any 2015-2019 V6, EcoBoost or GT Mustang.
You can choose the Nitto NT555 G2 Series Ultra-High Performance Street Radial Tires, improved traction, handling and wet braking capabilities will ensure that this tire performs the way you want in the straights, off the line and throughout hard turns.
One of the easiest ways to get the biggest visual impact from an upgrade to your 2015-2019 Mustang is by adding some new wheels from CJ Pony Parts. If you want to stray away from common replica style wheels, add a set of unique Velgen Wheels so your new S550 Mustang can be one of a kind. With the addition of matching available tire kits, your Mustang can look amazing in no time!
Order this Set of four Velgen 20" x 9" and 20" x 10.5" Matte Gunmetal VMB9 Wheels for your 2015, 2016, 2017, 2018 or 2019 V6, EcoBoost or GT Mustang from CJ Pony Parts today!