Scott Drake Wheel Center Cap Plain Center 1968-1969

Scott Drake:
C8OZ-1130-G
Scott Drake Wheel Center Cap Plain Center 1968-1969 is rated 3.3 out of 5 by 3.
  • y_2019, m_10, d_16, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_SSWC3P, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 130.36ms
  • REVIEWS, PRODUCT

Highlights

  • For 68-69 Styled Steel Wheels
  • Features Correct Finish
  • Black Painted Outer Ring
  • Sold Individually
MSRP $31.95
$28.76
You save 10%

Scott Drake Wheel Center Cap with a Plain Center for 1968-1969 Mustangs.

One of the most important parts of your car are the wheels. Make sure they look fantastic with a set of new wheel centers. Scott Drake high quality wheel center caps fit the styled steel wheels perfectly. Features the correct finish with a black painted outer ring.

Freshen up your Mustang with new center caps. This center cap is correct for 1968-1969 styled steel wheels. Scott Drake center caps are sold individually as replacement wheel center caps. Match the center caps with new wheel trim rings or wheel accents.

OTHER APPLICATIONS
Fits 1968-1969 Ford Falcon
Fits 1968-1969 Ford Fairlane
Fits 1968-1969 Ford Torino
Fits 1968-1969 Mercury Comet
Fits 1968-1969 Mercury Montego

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 1 out of 5 by from CAP DID NOT FIT ON WHEEL I WAS MISSING ONE CAP, HAD OTHER 3 WHICH FIT FINE. TRIED TO INSTALL THIS NEW REPRODUCTION BUT FOUND THE INSIDE DIAMETER WHERE IT PRESSES ON TO THE WHEEL IS TOO SMALL BY ABOUT..100 OF AN INCH. I CALLED CJ AND TOLD THEM. PROBLEM IS ALL THESE REPLACEMENTS MUST HAVE THE SAME PROBLEM. THE ONLY WAY I COULD GET IT ON WAS TO CAREFULLY REWORK THE INSIDE EDGE WITH A BODY HAMMER AND ANVIL UNTIL IT WOULD SNAP ON WITH A RUBBER MALLET. IT SEEMS TO FIT ON JUST RIGHT NOW, HOPEFULLY IT WILL NOT FLY OFF. I HAVE HAD PROBLEMS BEFORE WITH SOME OF SCOTT DRAKES REPRODUCTIONS. IT SEEMS THAT PARTS ARE NOT TEST FITTED BEFORE THEY ARE PRODUCED IN A LARGE AMOUNT. IT LOOKS GOOD, BUT AS MENTIONED THE FIT IS A PROBLEM.
Date published: 2018-07-29
Rated 4 out of 5 by from good re-pops GOOD:great replacement for worn out originals.fit well BAD: cheap black paint on inside/outside of ring, poorly painted & comes off with your fingernail. in 10 m time, I ended up using steel wool to remove all black paint
Date published: 2015-03-13
Rated 5 out of 5 by from Nice Caps! Fit well and look great! As always, shipped with the sheer quickness!
Date published: 2018-05-12
  • y_2019, m_10, d_16, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_SSWC3P, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.15ms
  • REVIEWS, PRODUCT

Will this Fit 1968-1969 Vintiques Wheel 15" X 7" Styled Steel

Asked by: BJRJR
No.
Answered by: rk cjpp
Date published: 2018-06-01

I have a 14" rim will this cap fit?

Asked by: stenno
If it is 1968-1969 styled steel wheel it will fit.
Answered by: rk cjpp
Date published: 2016-12-06
  • y_2019, m_10, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_SSWC3P, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 138.48ms
  • QUESTIONS, PRODUCT