National Front Wheel Inner Grease Seal 1965-1993
National Front Wheel Inner Grease Seal 1965-1993 is rated out of 5 by 3.
- Direct-Fit Replacement
- High Quality Materials
- Seals Against Dirt And Debris
- Sold Individually
You save 30%
National Front Wheel Inner Grease Seal for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 and 1993 Mustangs.This is a direct replacement front wheel inner grease seal for your damaged or missing original seal. Each front wheel requires one inner grease seal, so you will need two of these to complete a full replacement or restoration job. A proprietary RediCoat sealant is used to eliminate bore leakage from occurring. A patented lay-down sealing lip design ensures a long life, in spite of extreme temperatures, shaft imperfections, shaft or bore misalignment and excessive shaft thrust and movement.
Dimensions and Specifications:
Housing Bore (In): 2.500 Inch
Outside Diameter (In): 2.505 Inch
Width (In): 0.250 Inch
Shaft Size (In): 1.940 Inch
Shaft Width (In): 1.940 Inch
National's Front Wheel Inner Grease Seals are industry leading seals that will give you the desired performance you need. These seals increase wheel-end reliability by aggressively and effectively deflecting dirt, moisture and other contaminants from penetrating the wheel hub. This also helps in extending the life span of the wheels and keeps them functioning at the highest levels possible.
Will fit the following Mustangs:
- 1965-1966 V8
- 1967-1978 All
- 1979-1986 All
- 1987-1993 2.3L
Will NOT fit the following Mustangs:
- 1969 Boss
- 1987-1993 5.0L
- 1984-1986 SVO
*Sold individually. Car requires two.
National has built a reputation as one of the most respected names in the industry. They have offered premium sealing solutions for more than 70 years. Their design team keeps pace with the industry and provides advanced solutions even for today's most modern vehicles.
Rated 5 out of 5 by Rolly from Looks great Perfect fit easy to install looks like the original
Date published: 2015-04-26
Rated 5 out of 5 by 1986GT from Perfect Fit A week of having my car on jack stands, halfway in the garage. Parts store and dealer have the wrong part number. Customer rep was super! He verified the measurements and assured it was returnable if not a fit. I will be back for more parts in the future!
Date published: 2015-02-28
Rated 5 out of 5 by CeeM Mach 1 from Works well Bought it weeks ago and it fits. Works well.......
Date published: 2016-10-17
Will this also fit 1965/66 mustang 6 cyl.? Will fit the following Mustangs: - 1965-1966 V8 - 1967-1978 All - 1979-1986 All - 1987-1993 2.3L Will NOT fit the following Mustangs: - 1969 Boss - 1987-1993 5.0L - 1984-1986 SVO
No they will not.
Date published: 2017-12-20
How difficult is this to replace yourself?
Its not hard, with the rotor removed and working from the back side use a pry tool and pop out the old one, than using the proper seal installation tool install the new seal, this would be a good time to replace or check and repack your wheel bearings.
Date published: 2017-06-27
Does the red side of seal face toward the inner wheel bearing?
Yes it does.
Date published: 2017-12-20
Is this the correct seal for 9 inch drums?
This is a front inner grease seal.
Date published: 2018-09-24