Whiteline Camber Adjusting Bolt Front Kit 2015-2020

Whiteline:
KCA416
Rating:
100% of 100

Highlights

  • Adjust Camber
  • Easy Installation
  • Complete Kit
  • Toothed Lock Washer
MSRP $41.19
$37.07
You save 10%

Whiteline Front Camber Adjusting Bolt Kit for all 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs.

It's easy to adjust the front camber on your 2015-2020 Mustang with this Front Camber Adjusting Bolt Kit from Whiteline! This kit is designed to provide the largest adjustment range (+/- 1.5 degrees), and it's now available from CJ Pony Parts!

Features & Benefits:
- 16mm Camber Bolts
- Designed to Provide Largest Range of Up to +/- 1.5 Degrees of Camber Adjustment
- Uses a Special High Tensile Eccentric Bolt to Replace the Upper Strut Clevis Bolt
- Uses a Positive Toothed Lock Washer
- Locks Over and Over Without Slipping

This Whiteline KCA416 Front Camber Adjusting Bolt Kit uses 16mm camber bolts that will give you a large range of camber adjustment of +/- 1.5 degrees. The bolts use a positive tooth locked washer, which ensures these bolts will lock over and over again without slipping! Not only that, in lieu of the upper strut clevis bolt, this kit uses a special high tensile eccentric bolt. This kit includes 2 eccentric bolts, 2 tab washers and 2 lock nuts.

This Kit Includes:
- Two (2) Eccentric Bolts
- Two (2) Tab Washers
- Two (2) Lock Nuts

Torque Specification: Approximately 83 ft. lbs. (113 Nm)

The line of Whiteline parts available from CJ Pony Parts gives owners some options to improve cornering, grip and safety in aggressive and performance driving situations. Check out these Whiteline products and make an upgrade to your Mustang today!

Order a Whiteline KCA416 Front Camber Adjusting Bolt Kit for your 2015, 2016, 2017, 2018, 2019 or 2020 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with a pair of Whiteline camber adjusting bolts, fitting your 2015 through 2017 Mustang. Removing your factory strut bolt replacing with this Whiteline bolts will allow up to one and a half degrees of both positive and negative camber adjustment, and include a tooth lock washer to keep it locked in. These Whiteline camber bolts on an actual way to get low-cost camber adjustment on your S550 Mustang.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.