Whiteline Camber Adjusting Bolt Kit Front Fiesta ST 2014-2019

Whiteline:
KCA412
Rating:
100% of 100

Highlights

  • Adjust 1.5 Degrees Of Camber
  • Easy On Car Adjustment
  • Simple Installation
  • Sold As A Pair
MSRP $42.80
$38.52
You save 10%

Whiteline Front Camber Adjusting Bolt Kit for 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.

Easily adjust your 2014-2019 Fiesta ST's front camber with this all-new front camber adjusting bolt kit from Whiteline! This kit comes with everything you need to safely correct and dial-in the front camber on your Fiesta ST after it has been lowered.

Features and Benefits:
- (2) Eccentric Bolts with Tab Washers and Lock Nuts
- Adds +/- 1.5 Degrees of Camber
- Easy On-car Adjustability
- Simple Installation

Whiteline's camber adjusting bolts are designed to provide up to +/- 1.5 degrees of camber adjustment using a special high-tensile eccentric bolt to replace the upper strut clevis bolt. Unlike other friction lock designs, Whiteline uses a positive tooth lock washer which means no slip. The camber adjusting bolts are really simple to adjust and are guaranteed to lock time after time without slipping.

*These adjusting bolts can also be used to replace the lower bolt for additional positive or negative camber, but only recommended for race applications.

Tech Tip: Camber is the inclination of the wheel from the vertical when viewed from the front. When the top of the wheel leans out you have positive camber, when it leans in you have negative camber. It is important to note the fact that camber settings are ultimately a personal preference. That is, Whiteline can provide an indicative range to start from but the final number will depend on your driving style, average driving conditions, tire size and many other things. You need to start with a relevant number, then monitor tire wear and compensate if necessary.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with Whiteline's Camber Bolt Kit, fitting your 2014 Fiesta ST.

If you lower your Fiesta ST, the Whiteline Camber Bolts are a great way to get your camber back in spec. These are going to replace the upper strut mounting bolt. Depending on the orientation of the washer, you can either add plus or minus 1.5 degrees of camber, allowing you to adjust for both positive and negative.

If you plan on lowering your Fiesta ST, we do suggest picking up a set of these camber bolts to get your alignment in proper spec.

Vehicle Fitment

This product will fit the following Fiesta years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.