Window Regulator Front Passenger Side 1965-1966

CJ's Part Number: WR2R
CJ's Low Price:
1508112000 40339
Earn 28 RPM Points What's this?
Window Regulator Front Passenger Side 1965-1966
Window Regulator Front Passenger Side 1965-1966 Play Window Regulator Front Passenger Side 1965-1966 Video 1 Play Window Regulator Front Passenger Side 1965-1966 Video 2

Product Description

Passenger Side Front Window Regulator for 1965-1966 Mustangs.

Having issues with the passenger side window on your classic 1965-1966 Mustang? Try replacing the broken regulator with this Passenger Side Front Window Regulator today from CJ Pony Parts!

Features and Benefits:
- Passenger Side Specific
- OEM Style Replacement
- Simple No Fuss Installation

This reproduction front window regulator is a stock OEM-style replacement for your pony's original. This direct-fit replacement window regulator will raise and lower the passenger side front window. This is a common part to replace, as they are subject to high wear from constant use. Installation is easy since there are no modifications to make or any special tools required. Make your classic Mustang more comfortable in warmer months by easily lowering the windows--get a new front window regulator today!

Please Note: This Front Window Regulator will fit on your Mustang's passenger side only. A separate Driver Side Front Window Regulator (WR2L) is available.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and tail lights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order a new Passenger Side Front Window Regulator for your 1965-1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Window Components  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Window Regulator Front Passenger Side 1965-1966 is rated 4.3 out of 5 by 3.
Rated 4 out of 5 by from Screw or Clip style Window Cranks I got super lucky with passenger side but not driver side. I ordered passenger side WR2R and driver WR2L. The passenger side had both the screw style and the clip style. I needed the clip style, but even with the same part just for the drivers side it did not support a clip style handle. CJ Pony said they get the part from different manufacturers at different times! And this product supposedly is for the screw type not clip on and should have ordered another part. Would of been another few weeks on back order and I had to return this one at my shipping cost! Strike 1!! Be careful to get the right one for you, I didn't think of the 2 types till after I had the issue and why one is ok but not the other? My bad review will be on the driver side!
Date published: 2016-04-21
Rated 5 out of 5 by from Passenger Side Window Regulator I purchased this recently to fix my passenger side window and so glad I did. Product fit well and was easy to install.
Date published: 2015-01-07
Rated 4 out of 5 by from Relatively good value This item represents relatively good value for money.
Date published: 2016-03-24
  • y_2017, m_10, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_WR2R, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 38.11ms

Product Questions

I would need the bolts to install this to what is the part number for the bolts

Asked by: laurence j
We do not offer a hardware kit for the window regulator.
Answered by: rk cjpp
Date published: 2017-09-08

Does this come with the bolts to attach to inner door shell?

Asked by: ct35
No hardware is included.
Answered by: rk cjpp
Date published: 2017-06-22

I have the tmi sport r door panels on my 1965 mustang. Does the shaft of the regulators allow you to screw on the window  handles instead of using the clip or allen. Will this regulators shafts be long enough for the panels. 

Asked by: lamchop
The regulator uses a allen headed screw to hold the handles on. The only thing you need is a pony door handle cup kit.
Answered by: rk cjpp
Date published: 2016-03-31
  • y_2017, m_10, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_WR2R, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 144.97ms

You Might Also Like

Product Video

Window Regulator Front Passenger Side 1965-1966 Video Transcript
By Bill Tumas: So far, we've done a lot of nice upgrades to the interior of our Weekend Wrench project car. One of the things been bugging us we haven't worked on yet is our windows. Our regulators are pretty much shot on this car. Today I'm going to show you how to replace the regulator, the scissors, and the window rollers.

For this installation you'll need a Phillips Head screwdriver, door panel removal tool, 3/8 ratchet, 1/2 inch socket, small pick and if you're working on a '64 1/2 or early '65, you'll need a clip removal tool.

To access the window parts, we'll have to pull off the door panel. We're going to start with our door handle and our window crank. Our '65 has the early style clip on window handle and door crank-you'll need this tool to remove them. We're going to line it up with the top of the handle, slide it straight down and remove. Here's a close-up of the clip so you can see how it's removed. Once this slides up to the corner tab, push the clip outward and allow it to release itself. You want to keep your window crank handy because the window will have to go up and down to be able to remove it. Keep this clip off here-that way it won't latch in place.

At one point in time our '65 had a remote mirror so we're going to remove the remote control. Last step before we can remove the panel, is going to be the arm rest. You want to grab your door panel removal tool and remove your door panel. I'll remove your water shield. The regulator is held in by these four bolts here that we'll have to remove. These two are for adjustment-we can leave them alone for now. These three back here are going to hold our scissor in place-we have to remove them. We'll remove these two nuts that's at the bracket for the back of the scissor-that'll allow us to slide it out of the way, give us a little more room to remove everything.

Before we remove the scissor extension,-you can see right here-one of the broken window rollers; this is very commonly the culprit of the window that's hard to roll up, hard to put down or it moves around a lot when it's going up and down. We'll be replacing these, along with the scissor and the regulator.

We'll remove the clip now so we can remove our scissor from the window channel. With the small cotter pen-holds the regulator to the extension; we're going to push out the regulator. In our case our window regulator wasn't really in bad shape and the scissor had some play-the main culprit in our problem was the window rollers. As you can see both of them are busted causing issues with the window going up and down. There's only supposed to be two in here-the third one that must have broken somewhere along the line-these were replaced and that one was left behind.

We're going to remove them all and replace them with new ones. The last roller is this channel here which we're going to remove. There's the third roller which as you can see is also broken.

This is the basic design of the regulator and the scissor when it's going to be installed in your door. The regulator is going to turn the gear to move the scissor up and down. This is going to be the channel that we removed it's lifted onto the lower window roller and once installed these two rollers here will go on the window roller channel on the bottom of the glass itself. Your regulator and your scissor are in good shape. They do sell rollers separately-they come in a two pack-you'll need three per side.

With both the track we removed and the track still on the glass, want to clean them out as good as possible and put a new multi-bearing style grease in there to make the roller move easily against the channel. I'm going to clean and grease the channels on the car as well. Then we can install our new regulator. Install the same way we took out the original one-drop it to the bottom of the door-bring it across and up. Install the hardware just hand tight for now.

I'm going to pull the rollers off of our new scissor-put them in the channel and then we'll snap the scissor into them when we're done the installation. Pull the clip off and slide it off. We'll put the clip back on the roller into the lock position. The stud on the scissor will pop into place once we get it installed in the door. We'll put a little grease on the roller before we install it and we'll slide it in the channel. It should move nice and pretty with no resistance whatsoever.

We're going to begin installing the scissor. Knotting stud for the scissor is going to go through the hole in the regulator. Reinstall the clip; push the arm down-the scissor attached to it. Bring up the first part of the scissor, attach it to the roller, slide that over, and the second one-pop that in as well. We're going to line the scissor knotting bracket up with the holes-you do that by slightly turning the regulator-that will begin to come over into place. Now we can also tighten our regulator.

We're going to slide the channel on the latched roller down here. Before we reassemble everything on the door we want to test it out. Press the handle on, if it turns down like it's supposed to, back up-we're ready to reinstall our door panel. This time you normally want to replace the water shield before you reinstall your door panel. In our case-we'll actually going to be converting over to a different style door panel in the near future so we don't want to waste a set of water shields that we're just going to rip right back off anyway.

We're going to remove these clips-you want to slide the clip back down into the lock position before you reinstall your door panel or else it just going to pop right back off. Reinstall the washer first, if you hear a little pop-you'll know it's on. Check everything once last time and our installation is finished.

Now that the warm weather is here we're thrilled when you put the window up and down on our Weekend Wrench without any kind of hassles. Installation should only take you around an hour-you'll be back on the road in no time.