Window Weatherstrip Rear Fastback 1969-1970

CJ's Part Number: WSRW5
CJ's Low Price:
1508803200 40610
Make sure you get the right kind of adhesive to properly install your new rear window weatherstrip!
CJ's Low Price:
Earn 31 RPM Points What's this?
Window Weatherstrip Rear Fastback 1969-1970
Window Weatherstrip Rear Fastback 1969-1970 Window Weatherstrip Rear Fastback 1969-1970

Product Description

Rear Window Weatherstrip for all 1969-1970 Fastback Mustangs.

If you're restoring a classic 1969-1970 Mustang Fastback, then you're definitely going to need some new weatherstrip. Over time, the original weatherstrip on your vintage Pony can get cracked or can even go missing. So make sure you do a full weatherstrip replacement, and be sure to order this Rear Window Weatherstrip from CJ Pony Parts!

This Rear Window Weatherstrip is an original-style single-piece that completely forms to the window. It's made of sturdy rubber, and you'll get enough to line your entire rear window. This weatherstrip is designed to keep water out of your Mustang so it doesn't damage your interior and cause mildew or mold to form.

If you jump into your Mustang and notice wet floor or upholstery, it might be time to check out your Mustang Weatherstrip, to see if it is cracking or missing and needing immediate replacement. For many Mustangs, CJ Pony Parts has any piece of individual weatherstrip you need, so you can completely replace every piece, keeping water outside where it belongs.

Order Rear Window Weatherstrip for your 1969-1970 Fastback Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Fastback Weatherstrip  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 119.51ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Trying to install my rear window on a 1970 fastback with just sealer. For some reason the glass is 3/4 inch shy of sitting flush with the channel. So there is a gap on one side exposing the inside. I believe I need a gasket to do the job. Please help.

Asked by: Badmas
You will need this weatherstrip for proper installation.
Answered by: CJPP Dave
Date published: 2015-12-01
  • y_2017, m_10, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_WSRW5, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 33.47ms

You Might Also Like