Zone Offroad Products Suspension Lift Kit 6-1/2" With Struts 4WD Chevrolet Silverado 1500/GMC Sierra 1500 2007-2013

Zone Offroad Products:
C1
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 135.44ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$1,309.59

Zone Offroad Products 6-1/2" Suspension Lift Kit with Struts for 2007, 2008, 2009, 2010, 2011, 2012 and 2013 Chevrolet Silverado 1500s and GMC Sierra 1500s with 4WD.

This 6-1/2" Suspension Lift Kit with Struts from Zone Offroad Products is designed and engineered specifically for 2007-2013 Chevrolet 1500 Silverado and GMC 1500 Sierra 4WD pickups. This 6-1/2" Suspension Lift Kit will give you an off-road worthy truck that you can still use as a daily driver. Not only is this system over 90% made in the USA, it also has many advantages over the competition including new coil over struts instead of strut spacers.

Featured Technology and Benefits of the Zone Offroad Products 6-1/2" Suspension Lift Kit with Struts (C1):
- Over 90% Made in the USA
- Ductile iron, CNC machined steering knuckles maintain OE steering and ball joint geometry and allow fitment of 17" wheels
- Includes coil over struts with enhanced valving to control 35" tires
- Heavy-duty boxed one piece crossmembers that maintain a clean look
- Differential skid plate and support strut included for off-road protection
- Multi-point differential mounting system corrects drive line angles
- Weld-in control arm pocket plate included
- Rear solid cast iron blocks vs. fabricated blocks
- Works with factory Stabilitrak System
- Over 90% Made in the USA

By replacing the struts, Zone Offroad enhances the valving to control the unsprung weight of a 33" or 35" tire for a drastic increase in ride and handling performance over simple strut spacers. The crossmembers are made from 1/4" thick steel and maintain a clean appearance. To gain clearance for the relocated differential, like most kits on the market, the driver's side rear crossmember must be cut, but unlike some kits on the market, Zone Offroad includes a weld-in plate to maintain the control arm pocket's structural integrity. In addition to a heavy duty differential skid plate that locks the two crossmembers together an additional strut bar is added on the passenger side to add rigidity and additional protection.

The CNC machined ductile iron steering knuckles ensure proper steering and control arm geometry and do not limit you to 18" or larger wheels or require you to cut off the upper control arm droop limiter like the competition. By retaining the factory droop limit, you don't need to worry about excessive ball joint or steering component wear and be certain the system works with the trucks Stabilitrack System.

The differences don't end there, Zone Offroad only uses solid cast rear lift blocks as opposed to fabricated blocks and limits the height to 5". If you need additional rear height, Zone offers a preferred add-a-leaf (CJ's Part # C6159) to fight spring wrap and yield additional height.

Important Notes:
- All wheel drive models require front driveline modification.
- Will NOT fit 2007 Classic models
- Strut compressor required for installation
- Frame bracket modification and minor welding required
- To reduce trimming required, 20" wheels with 5-1/2 to 5-3/4" backspacing recommended
- Add-A-Leaf (CJ's Part # C6159) recommended for crew cab models for a more level stance
- Will not fit 2009-2012 two-mode hybrid models with electronic power steering (EPS)

Specifications:
Front Lift Height: 6 1/2″
Front Lift Method: IFS System
Rear Lift Height: 5″
Rear Lift Method: Block Kit

Install Time: Approximately 8 Hours
Difficulty Level (Scale of 1-5): 4

Wheel Size: 17x9
Back Spacing: 5″
Max Tire Size: 35 x 12.5 x 17

Wheel Size: 18x9
Back Spacing: 5″
Max Tire Size: 35 x 12.5 x 18

Wheel Size: 20x9
Back Spacing: 5.75″
Max Tire Size: 35 x 12.5 x 20

Order this Zone Offroad Products C1 6-1/2" Suspension Lift Kit with Struts for your 2007, 2008, 2009, 2010, 2011, 2012 or 2013 Chevrolet Silverado 1500 or GMC Sierra 1500 with 4WD from CJ Pony Parts today!

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following Silverado years:

  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.19ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 133.46ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;