Classic Auto Air Sanden Compressor A/C Upgrade Kit for 1987-1993 5.0L Mustangs.Classic Auto Air's ultra high-performance engine compartment upgrade kit makes it easy for even the novice to upgrade and convert the factory air-conditioning to the more modern 134a refrigerant. This simple and easy to install kit upgrades to the more reliable Sanden compressor and our exclusive parallel-flow direct-fit condenser, eliminating all except for one of the unreliable spring-lock hose connections. All hoses are pre-made to fit and require no cutting or crimping during installation.
When converting to 134a, everything necessary is provided, and Classic Auto Air's exclusive parallel-flow direct-fit condenser will make up the degradation in system efficiency that is lost in the conversion. In addition, for the high horsepower minded, Sanden's time-tested 6,000 rpm continuous duty rating is the right compressor for the job!
Compressor Upgrade Kit Includes:
- Sanden compressor w/serpentine pulley
- Compressor mount adapter brackets
- Serpentine belt
- All hoses and lines
- Orifice tube
- Pressure switch
- Installation instructions
*Retains original condenser and evaporator.
Similar Mustang PartsMore Air Conditioning Components
Product ReviewsWrite a review
Classic Auto Air Sanden Compressor Air Conditioning Upgrade Kit 5.0L 1987-1993 is rated out of 5 by 1.
Rated 5 out of 5 by Towerrat79 from Cold Air Again My AC Compressor finally stopped working after 24 years. I found this compressor kit and only minor modifications the AC was installed, filled and worked nice and cold.
Date published: 2016-04-17
Is their a kit that also includes the condenser also
The condenser would have to be purchased separately. This kit is to convert from r-12 to r-134.
Date published: 2016-06-10
Can you just purchase the accumulator w/ hose and the pressure switch
The accumulator can be found here, http://www.cjponyparts.com/air-conditioning-accumulator-tank-with-hose-5-0l-1986-1993/p/ACHA10/, we do not offer the pressure switch.
Date published: 2016-03-18
Is the compressor remanufacture
No, these are brand new parts.
Date published: 2015-09-01
do any remaining parts need to be drained or flushed prior to this convertion
Read over the instructions that are linked right from the product page. You'll find that you need to flush the whole A/C system.
Date published: 2015-05-12
May I to use this item in 2.3 engine ?
No, it will not work.
Date published: 2015-01-09
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$789.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$839.99