Dynacorn Door Hinge Kit for 1969-1970 Mustangs.If your Mustang's original door hinges have excessive wear, they can cause the doors to start sagging. When this happens, replace them with Dynacorn's door hinge kit for 1969-1970 Mustangs.
Hinge Kit Includes:
- Passenger side lower door hinge
- Passenger side upper door hinge
- Driver side lower door hinge
- Driver side upper door hinge
Similar Mustang PartsMore Mustang Door Hinges
Just installed these hinges on my son's 1970 Coupe. They bolted right in. Fit perfect and operate fantastic. Would definitely recommend as I don't think you can find a better set that bolt right on. Original hinges where worn out and the doors where sagging,hanging up and had to be lifted up to get to close without hitting. After installing the doors open and close like new. Did not have to modify anything. Great product. 2 Thumbs Up.
Purchased a set of these based on everything we have bought in Dynacorn has been a great fit with no modifications. The hinges when used on a factory original door will require some modifications. The best we could fit the door was about 1/2" too high and sticking out away from the body and fender on the bottom by at least 1 1/2". We have a Dynacorn door for the other side and the door was installed to perfect alignment in less then 5 minutes. The bootom hinge is also 1/2" longer than original hinge which likely causes the mis-alignment.
You Might Also Like