Bolt-On Unpainted Fiberglass Hood Scoop for 1969-1970 BOSS 429 Mustangs.This BOSS 429 style hood scoop is a great replacement for your original BOSS 429 hood scoop or as an upgrade for your 69-70 Mustang.
Installation requires drilling into the hood to mount to nine molded studs. Will require prepping, priming and painting prior to installation.
-Length = 27-3/4"
-Width = 23"
-Front Height = 3-1/2"
-Side Height = 2-1/2"
Product ReviewsWrite a review
Hood Scoop Fiberglass Unpainted Bolt-On Boss 429 1969-1970 is rated out of 5 by 3.
Rated 4 out of 5 by Premix from Not a straight bolt on IMHO This scoop looks great if your prepared to put the time into the prep. On close inspection on arrival I noticed holes in the front under the gel coat. I had to cut back the gel coat and the holes got bigger! Filled the holes with fibreglass and sanded flat. A couple of the threaded inserts were loose so used some JB weld on them. Once primed and painted it looks great, but a lot of work to get there, for the amount of work needed to make it acceptable it's def overpriced IMHO
Date published: 2016-05-24
Rated 1 out of 5 by Delmo from Not recommended Bought this for my boss9 clone. Not as big as original and body shop said it was too cheap and of poor quality to use.
Date published: 2015-01-30
Rated 5 out of 5 by nickie from looks great! Had it fitted to my 1969 mustang. Once sprayed black to match the rest of car looked ace!
Date published: 2016-04-16
You Might Also Like