Dash Trim Mounting Kit for 1967-1968 Mustangs.When installing a new dash trim kit, make sure you have all the necessary hardware for a correct installation. This kit is put together to mount all three pieces of the dash trim.
Kit contains 13 total pieces.
Product ReviewsWrite a review
Dash Trim Mounting Kit 1967-1968 is rated out of 5 by 2.
Rated 5 out of 5 by Honza4848 from Must have! When you replacing dash trim, you should pay a few more dollars for this hardware. It´s only for right upper and lower right parts, so don´t be confused with hardware for middle part. It´s holded by side parts.
Date published: 2016-01-02
Rated 4 out of 5 by John Lo from Highly recommend This is a good kit. You don't want to take off the old one and find incorrect fasteners. You should also run the nuts down to make the threads before installing.
Date published: 2016-02-22
Are the 2 bolts for mounting the small middle section, if not what hold that in location
The middle section has two tabs on it. One slips under the dash on the left side and the other will lock down behind the right-side dash panel when you install the right-side last.
Date published: 2015-11-02