Covercraft Block-It 380 Car Cover With Tri-bar Logo And 2 Mirror Pockets for all 1987, 1988, 1989, 1990, 1991, 1992 and 1993 GT Hatchback Mustangs and 1993 Cobra Mustangs.When you're looking to store away you 1987, 1988, 1989, 1990, 1991, 1992 or 1993 GT hatchback Mustang or 1993 Cobra Mustang during winter seasons but you don't have a garage or a place to store it, this Block-It 380 car cover from Covercraft is a great investment to protect your paint from getting damaged while out side in the elements. This Covercraft Block-It 380 Car Cover can be used for indoor use but mainly used for outdoor use.
Features and Benefits:
- Custom made to fit all 1987-1993 GT hatchback Mustangs and 1993 Cobra Mustangs
- Available with driver side or driver & passenger side mirror pockets for added protection
- High Performance Non-Woven Fabric
- 3-layer SFS - Designed for cost-effective performance
- A pair of grommets are pre-installed for locking the cover in place
- Inner layer is bicomponent spunbond to pamper the vehicle’s finish
- Elastic bands at the front and rear for superior fitment
- A single grommet for the antenna cutout is included
- Outdoor or Indoor use
- Tri-bar logo
- Taupe colored fabric
- Breathable fabric
- Dust/pollution barrier
- USA Made
The 380 Series fabric is Kimberly-Clark’s newest film barrier fabric, offering great performance at a competitive price. At 3.2 ounces per square yard, it’s about half the weight of the popular high-performance NOAH fabric. The three-layer construction uses inner and outer layers of spunbond, sandwiching a middle layer protective film barrier. The film barrier has microscopic holes, smaller than droplets of water and most dust particles, to stop moisture but still allow any moisture vapor or heat to easily escape from under the cover.
After working hard on your Mustang, you're going to want to protect it from dust, dirt and other debris, whether you garage it or not. While there are lots of options for covering your Mustang, the car covers from Covercraft are some of the highest quality, most durable options on the market. CJ Pony Parts carries these Covercraft products for most Mustangs on the road. All are available with free shipping, so make your order online, or give the CJ Pony Parts sales team a call today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$21.99
CoverCraft offers their Mustang car covers in two different materials. Shown here in gray, on the left, is their Block-It 200 Series. The Block-It 200 is a high potent non-woven fabric that is USA made and designed primarily for indoor use. It is a three-layer polypropylene material for moisture resistance and can be used for limited outdoor, but again, it's designed primarily for indoor use only.
On the right, the tan cover is their Block-It 380 Series. The Block-It 380 is a high performance Kimberly-Clark material that uses two layers with a film in-between. The film is designed to keep out moisture while allowing moisture and heat to escape from underneath the cover.
These covers are designed for both indoor and outdoor use and are UV protected as well. Both the Block-It 200 Series and the Block-It 380 Series have a soft woven liner to protect your paint when installing the cover.
Shown here is a Block-It 380 Series cover on a 1968 Mustang Coupe. This cover will fit all '64 through '68 coupes and convertibles. The fitment is so specific it actually has different models available for both single and dual rearview mirrors.
All CoverCraft covers are going to have the running horse logo on the front, elastic bands for a tighter fit in the front and the rear, a grommet is included for your antenna cutout and two grommets are pre- installed for locking your cover to your vehicle. Your paint job is one of the most expensive parts of your Mustang. Make sure you protect it with a high quality cover from CoverCraft.