Similar Mustang PartsMore Shock Towers
Product ReviewsWrite a review
Dynacorn Shock Tower Assembly Passenger Side 1967-1968 is rated out of 5 by 1.
Rated 4 out of 5 by Tiggie from Well Made This part is well made with heavy gauge steel. The fit is very good on my car, requiring only minor tweaking of the two tabs that spot weld to the top of the frame rail and grinding a very small area on the front bottom section to clear the frame rail. If you are looking for concours perfect, this part isn't it. The most obvious change from the original is the are welds in the seam between the upper control arm reinforcement plate and the shock tower, as pictured. This makes it stronger, but is not really correct. The hole for clearance to the crossmember bolt on the lower control arm/motor mount plate is much larger than original also. This doesn't affect function and no one will notice unless you are in the thoroughbred judging class. Spot welds are in the correct places, but a slightly smaller diameter than the originals. Four stars - great quality and fit but not 100% correct. Replace both sides and 99.99% won't notice the difference!
Date published: 2015-06-21
will this work in a big block car
Yes, it fits all 1967-1968 Mustangs.
Date published: 2015-02-16