STO N SHO License Plate Bracket for 2015, 2016 and 2017 Mustangs.
For those required to run a front license plate on their 2015-2017 Mustang but cringe at the thought of drilling holes in that beautiful painted bumper, this STO N SHO License Plate Bracket from CJ Pony Parts is the perfect alternative.
The STO N SHO is an aftermarket detachable front license plate bracket mounting system that is designed for cars whose appearance would be ruined by use of the factory mounting location. Many states require a license plate on the rear and front of the vehicle, and front license plates tend to take away from the look of the 2015-2017 Mustang.
Every STO N SHO was designed with the car show enthusiast in mind. Stay in compliance with state law by simply “STO”ing your front license plate when you want to “SHO” the beauty of your Mustang. Then, reinstall once you are ready to hit the road. There’s no hassle or strain when operating this bracket system: it is simply the best solution for the car enthusiast living in a state that requires a front license plate. The STO N SHO is a two-piece, detachable mounting system consisting of a front license plate holder and a base mounting plate. Removal and installation of the license plate is extremely easy, requiring only the pull of a pin. Once the front license plate holder is removed, the base plate is virtually undetectable.
Each bracket is constructed in the USA from premium-quality 5052 and 6061 aluminum. Both plates are precision laser cut and hand burnished. Each tube and rod is machine cut and hand cleaned. After the welds are ground smooth, a high-quality automotive trim black paint is applied and the product is tested to ensure proper operation. This newly re-designed bracket will no longer require modifications or cutting to ensure a proper fit, meaning that install is even faster than before! No special tools needed at all during the quick process. Order your new front license plate bracket today from CJ's!
Please Note: This will fit all 2015-2017 Mustangs except for the 1,964 Limited Edition 50th Anniversary GTs and Performance Package GTs which have a different/larger front chin spoiler.
Don't ruin the aggressive appearance of your beautiful 2015, 2016 or 2017 Mustang and lose points at car shows. Instead, order a STO N SHO License Plate Bracket for your 2015-2017 Mustang from CJ Pony Parts today!
Similar Mustang PartsMore License Plate Brackets
Product ReviewsWrite a review
will the license plate bracket STO N SHO fit the 2017 Shelby GT 350
Hi Will the stonsho number plate holder fit the 2017 model for Australia
Where Is The Mounting Diagram For This Plate Bracket And Will It Adapt To Front Bumper Of A 2012 Ford F-150 Harley Davidson Edition Pick Up Truck?
doesit fit 2015 mustang ecoboost premium with performance packet? can it be installed without any drills?
will this fit a 2016 California special. with the larger front spoiler.
Will this fit my 2016 GT California Special?
i am after one of these for my ecoboost premium arriving is Australia in December. i have ordered US style plates here. it looks like this one will fit. Sam.
Hi, will this fit an Australian delivered RHD 5.0L mustang
You Might Also Like
CJ's Low Price:$109.99
CJ's Low Price:$84.99
CJ's Low Price:$84.99
We begin the installation by removing the two 7mm screws located right here, in these two holes in the front of the belly pan underneath the splitter. In order to put the bracket on using the supplied hardware, you want the holes to be towards the back of the car. In our case we do have the rubber air dam on our car, it was damaged thanks to a little off-road excursion at our local race track. Normally, this will be up tight against this and we'll push the bracket right up against it. We put the screw through, we're going to put the spacer on top.
Now we'll take our plate, using the supplied hardware, connect it to the bracket. Now I'm going to install it on the car. To install the plate you simply pull the pin, line everything up, and slide it on until it locks and your installation is finished. If you have to run a front plate on your 2015 through 2016 Mustang, the Stow and Show's the way to do it. It uses factory holes, so no modifications are required. It's very easy to install and also very easy to remove. It should only take you about 20 minutes to install and you'll be back on the road in no time.