Mustang Driver's Side Headlight Bowl (1967-1968) Installation Instructions

• 
• 
• 
• 

1967-1968 Mustang Driver's Side Headlight Bowl

This Driver's Side Headlight Bowl fits every 1967-1968 Mustang.

As a direct replacement for the original Mustang headlight bowl, this part can easily be an upgrade to rusty or damaged headlight bowls in your classic Mustang! Features easy installation!

This Install Also Applies To:

• Mustang Headlight Bowl Driver Side Or Passenger Side Reproduction 1965-1966
• Mustang Headlight Bowl Passenger Side 1967-1968
• Mustang Headlight Bowl Left 67-8 64-6 Left & Rt 1964-1968
• Mustang Driver Side Headlight Bowl Steel 1970-1970
• Mustang Headlight Bowl Steel Passenger Side 1970
• Mustang Headlight Bowl Driver Side Low Beam 69
• Mustang Headlight Bowl Passenger Side Low Beam 69
• Mustang Driver Side High Beam Head Light Bowl 1969-1969
• Mustang Passenger Side High Beam Head Light Bowl 1969-1969

Tools Required:

• Phillips Head Screw Driver

Install Difficulty:

• 
• Easy Project

1. To begin the installation of your new Mustang Driver's Side Headlight Bowl, remove the three screws that hold the Mustang headlight door ring in place and set the ring aside.

2. Locate and remove the three screws holding in the headlight retaining ring.

3. Set the Mustang headlight retaining ring aside.

4. Disconnect the Mustang headlight and place it aside.

5. Unhook the retaining spring and loosen the horizontal and vertical adjusting screws on the Mustang headlights.

6. Remove the old headlight bowl.

7. Unpack your new headlight bowl (both driver's side and Mustang passenger's side headlight bowl shown).

8. Attach the new headlight bowl by reattaching the retaining spring and fitting the slots onto the horizontal and vertical leveling screws. Then, reinstall the retaining ring, headlight and headlight door ring to complete the installation of your new Mustang Headlight Bowl.