Mustang Sealed Beam Headlight (1965-1968/1970-1973) Installation Instructions

• 
• 
• 
• 

1965-1968/1970-1973 Mustang Sealed Beam Halogen Headlight with FoMoCo Script

This Sealed Beam Halogen Headlight with FoMoCo Script is for 1965-1968 Mustangs and 1970-1973 Mustangs.

Upgrade the headlights in your 1965-1968/1970-1973 Mustang with these Sealed Beam Halogen Headlights, which feature the correct FoMoCo script etched on the light. Each car requires two. These lights do NOT fit 1969 Mustangs.

This Install Also Applies To:

• Mustang Scott Drake Headlight Halogen 'FoMoCo' 1965-1968/1970-1973
• Mustang Headlight Sealed Beam Halogen 1965-1968/1970-1973
• Mustang Headlight Sealed Beam Incandescent With FoMoCo Script 1965-1968/1970-1973
• Mustang Headlight Retaining Trim Ring 1965-1968/1970-1973
• Mustang Scott Drake Headlight Retaining Ring Stainless Steel 1965-1968/1970-1973
• Mustang Headlight Door Ring Chrome 1967-1968
• Mustang Halogen Headlight H4 Pair 1965-1973
• Mustang Delta Tech Headlight 7" Xenon Hi-Po Pair 1965-1973

Tools Required:

• Screw Driver

Install Difficulty:

• 
• Easy Project

1. To start the installation of your new Mustang H6024 Sealed Beam Halogen Headlight, locate one of the two (2) headlights. Remove the three screws that hold the headlight door ring and set the ring aside.

2. Locate and remove the three screws holding in the Mustang headlight retaining ring.

3. Set the retaining ring aside.

4. Pull the old headlight out. If your headlight bowl looks like this, consider wearing gloves and check your tetanus shot history. Also, consider replacing your Mustang headlight bowls. Note the three prong connector on the existing headlight.

5. Unpack your new Mustang headlight.

6. Unhook the old headlight. Connect the three prong connector to the new headlight and repeat this process in reverse to finish installation.

7. You've now completed the installation of your new Mustang Sealed Beam Halogen Headlight!