Power Steering Control Valve 1968-1970

CJ's Part Number: CV4

Regular Price: $288.99

Special Price: $202.29

1490486400 9770
When you replace the power steering control valve, go ahead and replace the hoses as well.

Regular Price: $49.99

Special Price: $39.99

Earn 202 RPM Points What's this?
1490054400 1490918400
On Sale: Up to 30% Off Sale!
Power Steering Control Valve 1968-1970
Power Steering Control Valve 1968-1970 Power Steering Control Valve 1968-1970 Play Power Steering Control Valve 1968-1970 Video 1 Play Power Steering Control Valve 1968-1970 Video 2

Product Description

Power Steering Control Valve for all 1968, 1969 and 1970 Mustangs.

If you are experiencing inconsistent steering and control issues in your 1968-1970 Mustang, then most likely a new power steering control valve will alleviate the problem. This Power Steering Control Valve is not a rebuild, but is manufactured from all brand new components giving you a great new direct replacement to install and get you back in full control of the steering in your Mustang. This new valve will make sure the correct amount of fluid is transferred for even road feel and easy turning that requires minimal force to turn the steering wheel, even when stopped or at very low speeds.

Replacing this valve will restore your steering back to the way it is supposed to be and will make your power steering feel even tighter than the original. This Power Steering Control Valve features a 5/16” pressure port for the power steering hose that will work in any 1968, 1969 or 1970 Mustang, regardless of the engine size you have. This is a direct replacement that will get your steering tightened up and feeling like it did when you sat in her for first time.

If you are having difficulty turning in your 1968-1970 Mustang with power steering, most of the time it is because something isn’t quite right with the control valve. After years of use and exposure to heat and the elements, the parts on your Mustang are going to need replaced and this valve is no exception. Come to a name you can trust and get this new Power Steering Control Valve and much, much more from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Control Valves  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Power Steering Control Valve 1968-1970 is rated 4.0 out of 5 by 4.
Rated 1 out of 5 by from Not happy. I purchased this for my 68 Couger. The valve sleeve on the product was 1/4 inch longer than on the one I replaced. In order to achieve the 4 7/8 inch measurement, I needed to flair the end of the sleeve so it would screw on to the center link sufficiently. The ball stud was very sticky, despite my greasing it. I now have a resistance to moving to and from center that makes driving the car an effort, vs a pleasure. I've replaced all other components of the steering, so can't blame its performance on anything other than the control valve.
Date published: 2016-05-11
Rated 5 out of 5 by from Works great I have bought two of these from different vendors. This one works excellent without having to make any adjustments.
Date published: 2015-01-15
Rated 5 out of 5 by from Well built valve My 69 Mach 1 steering was very stiff as if there was not power steering at all. I noticed C J Pony Parts offered two valves that appeared to be identical in the pictures while one was roughly $150.00 more expensive than the other. I was confused about the price difference between the two control valves offered, so I called to speak to a representative about it. He researched the two valves offered and couldn't understand why there would be such a price difference. I opted for the less expensive of the two valves. I installed the control valve of the lesser price and have had no problems (as yet) with my decision. My 69 Mach 1 steering problems disappeared. It appears the more expensive valve is built by a company that is a bit proud of their stock. During the valve replacement, I did notice some wear on the hoses and had to acquire replacement hoses locally. I had to have them NOW. I had to do some reforming of the metal portion of the hoses to make them identical to the original hoses. The after market hoses were not exact, but could be reformed to the original curves and angles. If I had it to do over again I would have ordered new hoses from C J when I ordered the control valve.
Date published: 2016-05-15
Rated 5 out of 5 by from All the parts for mustang, You sell , great stuff Keep up the great work, The staff is very helpful when you have a problem.And fast shipping and packaging free
Date published: 2017-02-14
  • y_2017, m_3, d_25, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_CV4, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 34.58ms

Product Questions

My mustang is year 69 model Hard top, do you recommend me this part?

Asked by: gil29
This will fit a 69 mustang with power steering.
Answered by: rk cjpp
Date published: 2016-11-27

The powersteering valve as advertising for $288. Will it fit any mustang 1967 convertible with 289 C.

Asked by: Hans Bart
it will fit with an adapter for the pump lines
Answered by: Tain
Date published: 2016-06-30

Is there a core charge?

Asked by: goss
No, there is NOT a core charge.
Answered by: CJPP Dave
Date published: 2016-03-30

CJ Pony P! Will this Flaming River Power Steering Control Valve, also fit on a 1970 Mercury Cougar? And if it does, is this better quality and more stabil than the other valve you have to the half price? Or does it only have with the oil pressure to do?

Asked by: Livar
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: CJPP Dave
Date published: 2016-01-08

Hi I need a power steering, power assist valve with a pump.. for a 1966 Mustang convertible, 289 engine.. with this 1968 part work?

Asked by: Marie8
No, this one won't work. Look up CJ part # CV5, which is for 1966 V8s.
Answered by: CJ Pony Parts
Date published: 2015-09-06

Will this fit my 68 mustang convertible with a 289?

Asked by: Ikolmike
  • y_2017, m_3, d_24, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_CV4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.23ms

You Might Also Like

Product Video

Power Steering Control Valve 1968-1970 Video Transcript
By Bill Tumas: We're here with a replacement power steering control valve for your '68 through '70 Mustang. Our control valve is not a rebuild; it's a brand new part. It includes a 5/16 pressure port that will work on all '68 through '70 Mustangs regardless of engine. If you're having difficulty with your power steering not working properly, many times, the control valve's going to be the culprit.