Roush Lowering Springs Blue Powder-Coat Rear Pair 2005-2014

Roush: 401295
MSRP: $128.99
CJ's Low Price:
$123.99
1481328000 48531
Earn 123 RPM Points What's this?
Roush Lowering Springs Blue Powder-Coat Rear Pair 2005-2014
Roush Lowering Springs Blue Powder-Coat Rear Pair 2005-2014 Roush Lowering Springs Blue Powder-Coat Rear Pair 2005-2014
Roush

Product Description

Pair of Roush Blue Powder-Coated Rear Lowering Springs for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.

This set of rear coil springs is ideal for Mustang owner who wants to get better performance out of their Mustang without lowering their car too much. Roush's rear coil springs are extensively engineered and tested by Roush's own performance engineers to provide optimum performance out of your 2005-2014 Mustang. Not only do they provide some of the best quality lowering springs available, Roush takes its development a step further by finely tuning its suspension components and thoroughly test their products to ensure proper balance with entire vehicle as an integrated system.

The factory suspension on the 2005-2014 Mustang is decent for most, but a lot of people have chosen to upgrade their coil springs for an overall better driving experience and increased handling. Your average Mustang owner wants to get a better feel while driving their car. Roush has the perfect set of rear coil springs, lowering the rear end of your 05-14 Mustang 1/2-inch.

Features and Benefits:
- Drastically Improves Handling
- Lowers all Mustang 1/2-inch
- Better Ride Quality
- Improved Stance
- Blue powder coat
- Installs on all 2005-2014 Mustangs
- Pair of rear coil springs 

*It is recommended after installing these Roush coil springs to check the centering of the rear axle. An adjustable Panhard bar may be needed to rear center the rear axle.

Are you looking for a more controlled ride from your Mustang when you're on the highway or speeding around at the track? Give the suspension on your 2005-2014 Mustang a huge upgrade in the performance and handling department. Mustang owners who race their 2005-2014 Mustangs, or appreciate high performance driving, dislike many elements of the stock Mustang suspension.

If you're one of these owners, Order a Pair of Roush Blue Powder-Coated Rear Lowering Springs for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Springs  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Roush Lowering Springs Blue Powder-Coat Rear Pair 2005-2014 is rated 4.9 out of 5 by 7.
Rated 5 out of 5 by from Just enough Lowered just enough and put the look I wanted. Did not notice much ot a difference in the ride. The value is great.
Date published: 2016-09-11
Rated 5 out of 5 by from Excellent upgrade I didn't want to lower my car to much or change the front set up, so i got this. I'm very happy with the results.
Date published: 2015-06-21
Rated 5 out of 5 by from Roush - Roush Lowering Springs Blue Powder-Coat Re Installed easy enough, final result is exactly what i wanted , My car is now Level on the profile view. Seems all 13 and 14 Mustang bodies are 1 inch higher in the back. Test drive went very well, handles better than stock, but retains a great ride , I like my new springs !!! Re Centered the axle to the body and Job done.
Date published: 2015-03-30
Rated 5 out of 5 by from Looks great Easy to install. Rides a little stiffer and looks good.
Date published: 2016-01-09
Rated 4 out of 5 by from Good springs so far. Lower then expected I just got these on my 2014 v6 convertible, I notice the drop is much closer to 1 inch in the rear vs the 1/2 in the description and 1/4 per side difference. I know some of these differences are because of the added weight of a drop top but thats only 129 lbs . the rides seems a bit softer/ better then eibachs I have owned. Going to get the fronts as well and see how I like the entire setup.
Date published: 2015-09-20
Rated 5 out of 5 by from RoushLowering Springs I had these installed in my 2009 gt coupe and they are perfect! they give your car the Rack effect half inch lower in the front , I had eibach sportlines before these and they were way to low plus the rear was about half inch lower then the front so it looked like a boat in the waters with the front higher, if you looking for a nice Mild drop and keep your handling get these springs!
Date published: 2016-01-02
Rated 5 out of 5 by from Got the stance I was looking for Got the stance I was looking for without having to buy a whole set of springs and go to the alignment shop.
Date published: 2016-07-16
  • y_2016, m_12, d_10, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_401295, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.49ms
  • REVIEWS, PRODUCT

Product Questions

Can l use in mustang gt 06 v8

Asked by: Joctavio
Yes.
Answered by: CJPP Dave
Date published: 2016-10-03

Is it necessary to check the pinion angle?

Asked by: pss3286
It is always recommended.
Answered by: CJPP Dave
Date published: 2016-09-30

Can I put these on a 2013 GT500 convertible?

Asked by: joel23459
Yes.
Answered by: CJPP Dave
Date published: 2016-04-20

Can I use these on a 2012 Shelby GT500?  

Asked by: JCHshelby
Yes.
Answered by: CJPP Dave
Date published: 2015-12-24

Would the drop be the same on the 14 v6 convertible? more or less?

Asked by: Gammer2015
Yes, the drop is the same on all models from 2005-2014.
Answered by: CJ Pony Parts
Date published: 2015-09-14

will the work with stock shocks/struts ? and strut mounts? do i need to change anything? 

Asked by: mike25
Yes, you can leave the stock struts/shocks alone if you want. It's recommended that, if you're going for performance, you replace them, but if you're just going for a lowered look you'll be fine. However, you may need a panhard bar to re-center the rear end after you install the springs, as it might be off center.
Answered by: CJ Pony Parts
Date published: 2015-08-12

Do you need to install a adjustable panhard bar after installing the rear lowering springs

Asked by: richbth
It is recommended after installing these Roush coil springs to check the centering of the rear axle. An adjustable Panhard bar may be needed to rear center the rear axle.
Answered by: CJ Pony Parts
Date published: 2015-07-08

I have a 13 Mustang GT with the track pack, will I need an adjustable panhard bar ? Anyone who installed the springs and needed to adjust the centering of the rear axle ??

Asked by: VioletteStang
It's necessary to use an adjustable panhard bar when lowering your vehicle as it allows you to re-center the rear end.
Answered by: CJ Pony Parts
Date published: 2015-06-16
  • 2016-12-10T08:07CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_401295, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 98.48ms
  • QUESTIONS, PRODUCT

You Might Also Like