Shift Boot retainer 12 x 1.25 2005-2014

CJ's Part Number: HW3045-V
CJ's Low Price:
$25.99
1429228800 42138
With a large selection of available shift knobs, check out these few examples that can perfectly accompany your new shift boot retainer.
Earn 25 RPM Points What's this?
HW3045-V
HW3045-V HW3045-V_1 HW3045-V_2 HW3045-V_3 Play Shift Boot retainer 12 x 1.25 2005-2014 Video 1

Product Description

Shift Boot Retainer 12mm x 1.25 for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, and 2014 Mustangs with a Manual Transmission.

Use this Aluminum Shift Boot Retainer to properly tighten your aftermarket shift knob on the shift lever. This shift boot retainer will allow for proper installation of an aftermarket shift knob. If you have installed an aftermarket shift knob or shift boot, your shift ball may not be aligned straight when the knob is tightened on the shift lever. This will function as a jam nut while eliminating the gap between your shift knob and shift boot. Not to mention, it will look great while serving a purpose!

Features and Benefits:
- Allows proper installation of aftermarket shift knob
- Eliminates gap between shift knob and boot
- Available in Black or Silver
- Thread size is 12mm x 1.25
- Aluminum Construction
- Sold Individually

*Does NOT fit 2007-2014 GT500s.
*If you have installed a Steeda shifter in your 2005-2014, check the thread pitch as it may be different.

This Shift Boot Retainer is available in two different finishes. All of which are made from Aluminum. You have your choice of a Black Finish or a Silver Finish. No matter which you choose, you'll be sure to add that much needed custom touch to the interior of your 2005-2014 Mustang.

Use this to tighten your CJ Pony Parts shift knob on the shift lever. Without a shift boot retainer, your shift ball may not be aligned straight when the knob is tightened on the shift lever. This functions as a jam nut while eliminating the gap between your shift knob and shift boot.

Order this 12mm x 1.25 Shift Boot Retainer for your 2005-2014 Mustang with a Manual Transmission from CJ Pony Parts today!

Similar Mustang Parts

similar mustang parts More Mustang Shifters  

Installation Instructions

Difficulty

Difficulty: Easy

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
1
Shift Boot retainer 12 x 1.25 2005-2014 is rated 3.75 out of 5 by 4.
Rated 2 out of 5 by from Works as a jam nut, but won't hold the boot up. Bought this with a new shift knob. Installed in about 2 minutes after watching the video to make sure there wasn't anything screwy that I needed to know. Everything looked good. Got in and drove the car....and there goes the shift boot dropping about an inch below the retainer. I didn't see anything of read any trick that needed to be done in order to have it hold the shift boot in place. So, sure....it works as a jam nut, but thats about it as far as I can see.
Date published: 2015-02-16
Rated 4 out of 5 by from Absolutely needed for any after market shift knob I replaced my OEM shift knob with one from CJ Pony Parts, and I remembered to purchase the shift boot retainer. Reminder, CJ Pony Parts does NOT include them with the shift knob purchase like other vendors do. So if you purchase your shift knob here, do not forget the boot retainer.
Date published: 2015-02-20
Rated 5 out of 5 by from Good quality addition I bought this to go with a black shift knob and it goes with it seamlessly. Install of this item was a breeze.
Date published: 2015-01-21
Rated 4 out of 5 by from Make sure you know your shift boot I ordered my custom shift knob and retainer same day from CJ Pony, great service the retainer came in quickly, the knob being custom I knew would take a few weeks. CJ called me and let me know ETA of my knob, then called again and told me there would be a slight delay and it would not ship until a couple of weeks after the original estimate. Winter here in the north so the car is put away for the winter so no worries. Amazing customer service from CJ Pony though. I did encounter one issue with my order however that has nothing to do with the service or quality of the parts which while not installed appear to be of an excellent grade. Following receipt of the retainer I began to suspect the pawn style was not correct fitment for my 2013 Mustang GT with the 401A shift boot. The boot has a chromed ring at the top of the shift boot which makes the pawn style in appropriate for this installation where in fact the "Tube Style Billet" retainer made by Silver Horse Racing and also sold on this site is the correct retainer. If you must have the pawn style retainer you will need to purchase the boot for the 400 interior. Silver Horse Racing's site clearly indicates that the tube style retainer is the correct part for this style boot. So I guess I will find out if CJ Pony's customer service on returns is as good as it is on orders. I know I could have ordered the replacement from this site but felt that if Silver Horse was going to have better information on their site I should some how reward them. I'll keep you posted on the part return service.
Date published: 2015-03-31
  • 2015-04-17T09:08CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW3045-V, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions

1

You Might Also Like