Covercraft Block-It 200 Car Cover with a Tri-bar Logo and mirror pockets for all 1987, 1988, 1989, 1990, 1991, 1992 and 1993 Hatchback GT Mustangs and 1993 Cobra Mustangs.If you are in the market for a new custom fit car cover for your 1987-1993 hatchback GT Mustang or 1993 Cobra, and not looking to break the bank, this all new Block-It 200 Car Cover with a Tri-bar Logo from Covercraft is the perfect choice! The Covercraft Block-It 200 Car Cover is designed for light outdoor use and is primarily geared towards all 1987, 1988, 1989, 1990, 1991, 1992 and 1993 hatchback GT Mustang and 1993 Mustang Cobra owners who keep their prized possession indoors or who live in a mild-weather environment.
Features and Benefits:
- Custom made to fit all 1987-1993 hatchback GT Mustangs and 1993 Cobra Mustangs
- Mirror pockets for the driver and passenger side mirror
- Block-It 200 covers offer great indoor dust protection with limited outdoor usage
- Gray Block-It 200 material looks great on any color Mustang
- 3-layer polypropylene construction for moisture and dust resistance
- High-performance non-woven fabric is soft to the touch
- Soft inner liner to protect your Mustang's paint
- Elastic bands at the front and rear for superior fitment
- A pair of grommets are pre-installed for locking the cover to your Mustang
- A single grommet for the antenna cutout is included
- Made in the USA
- Tri-bar logo
The Block-It 200 Series fabric was developed by Kimberly-Clark to be a mid-price leader in quality and protection. This unique fabric uses a three-layer polypropylene construction for moisture and dust resistance, and the fibers are treated for extra UV resistance. If you are looking for an inexpensive cover for indoor storage and limited outdoor use, this U.S.A. made fabric offers good protection at an excellent value.
After working hard on your Fox Body Mustang, you're going to want to protect it from dust, dirt and other debris, whether you garage it or not. While there are lots of options for covering your Mustang, the car covers from Covercraft are some of the highest quality, most durable options on the market. Every one is custom fit to your model of 1987, 1988, 1989, 1990, 1991, 1992 or 1993 Mustang, guaranteeing the highest levels of protection. Order yours today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$21.99
CoverCraft offers their Mustang car covers in two different materials. Shown here in gray, on the left, is their Block-It 200 Series. The Block-It 200 is a high potent non-woven fabric that is USA made and designed primarily for indoor use. It is a three-layer polypropylene material for moisture resistance and can be used for limited outdoor, but again, it's designed primarily for indoor use only.
On the right, the tan cover is their Block-It 380 Series. The Block-It 380 is a high performance Kimberly-Clark material that uses two layers with a film in-between. The film is designed to keep out moisture while allowing moisture and heat to escape from underneath the cover.
These covers are designed for both indoor and outdoor use and are UV protected as well. Both the Block-It 200 Series and the Block-It 380 Series have a soft woven liner to protect your paint when installing the cover.
Shown here is a Block-It 380 Series cover on a 1968 Mustang Coupe. This cover will fit all '64 through '68 coupes and convertibles. The fitment is so specific it actually has different models available for both single and dual rearview mirrors.
All CoverCraft covers are going to have the running horse logo on the front, elastic bands for a tighter fit in the front and the rear, a grommet is included for your antenna cutout and two grommets are pre- installed for locking your cover to your vehicle. Your paint job is one of the most expensive parts of your Mustang. Make sure you protect it with a high quality cover from CoverCraft.