Standard Dual Exhaust Kit 2" With Ceramic Tri-Y Headers 289/302 1965-1970

Vendor Part Number: EXK2E
MSRP: $917.24

Regular Price: $698.99

Special Price: $664.04

1490572800 13152
Earn 664 RPM Points What's this?
1490054400 1490918400
On Sale: Up to 30% Off Sale!
Standard Dual Exhaust Kit 2" With Ceramic Tri-Y Headers 289/302 1965-1970

Product Description

2" Standard Dual Exhaust Kit with Ceramic Tri-Y Headers for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with a 289 or 302 Engine.

Replace your damaged or missing original exhaust system with a completely new standard dual exhaust kit. This kit includes everything needed from the engine to the tailpipes. The most complete kit we offer!

Includes Pertronix ceramic coated Tri-Y headers. These headers will provide horsepower improvements and great looks for years to come! Constructed from 16 gauge steel tubing, then miter cut and mig welded together for a very unique sound. The primary tubes are 1-1/2", the secondary tubes are 1-3/4" and the collectors are 2-1/2". Tri-Y headers also include 2-1/4" collector reducers, gaskets and hardware.

Kit Includes:
- Pertronix ceramic coated Tri-Y headers
- Header collector reducers 2-1/2" to 2"
- H-pipe 2"
- 2-Intermediate pipes 2"
- 2-Mufflers 2"
- 2-Tailpipes 2"
- 8-Exhaust U-clamps 2"
- 2-Exhaust hangers

*This exhaust kit will NOT work with staggered shocks
*Power steering equipped cars will need part (SCB) to lower the power steering slave cylinder for clearance.
*Will NOT fit GT-40P heads or AOD transmission!
*Sometimes some small modifications are necessary to the equalizer bar and clutch rods for clearance on manual transmission vehicles.

Similar Mustang Parts

similar Mustang parts More Dual Exhaust Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Standard Dual Exhaust Kit 2" With Ceramic Tri-Y Headers 289/302 1965-1970 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Good fit Everything was a great fit except minor interference with the power steering even with the lowering bracket. I added a few washers and clearance was no longer an issue. I would invest in buying better hangers.
Date published: 2015-11-16
  • y_2017, m_3, d_27, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EXK2E, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 40.92ms

Product Questions

When I buy this kit for 1967 mustang is there any modifying or cutting that has to be done or extra parts need?  The engine is a 289 and no power steering

Asked by: Ges71
This is a complete kit. There should be no modifying or cutting that needs done.
Answered by: CJPP Dave
Date published: 2017-01-27

also i want to know weigth

Asked by: jacek1971
It's 69.1 pounds, which includes packing materials, making the product itself a bit lighter than that.
Answered by: CJ Pony Parts
Date published: 2015-03-29

Will this exhaust exist the rear valance ? If not do you have one that does?

Asked by: Rickmt57
  • y_2017, m_3, d_26, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_EXK2E, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 37.59ms

You Might Also Like