Starter Front Steering and Suspension Kit for 1968-1969 Mustangs.We offer a starter front steering and suspension kit to help get your Mustang back on the road. Replace those worn out rusty parts with this kit featuring direct replacement parts. Your Mustang will feel like a brand new car after the installation of our kit.
- Two upper control arms
- Two lower control arms
- Two coil spring saddles
- Two coil spring insulators
- Two front sway bar end links
- Two inner tie rods
- Two outer tie rods
- Two tie rod sleeves
- Strut rod bushing kit
*Will NOT fit Boss.
Product ReviewsWrite a review
Starter Front Steering and Suspension Kit 1968-1969 is rated out of 5 by 2.
Rated 4 out of 5 by Peter Duncan from Most complete suspension kit I had found I bought this kit because the entire front suspension in my 68 Mustang coupe was worn out. Ball joints, tie rod ends, spring perch, the whole nine yards was done. The whole kit went together just as removing removing the old stuff. I did have to modify the towers if I ever wanted to grease the upper A arm pivot point after installation. I have not driven the vehicle since the installation because it has a long way to go before it is roadworthy.
Date published: 2015-02-26
Rated 5 out of 5 by rms914 from Decent stock replacment kit This seems to be a decent front suspension kit. no issues so far
Date published: 2015-01-08
Hello. My question >> what is the material this is made of? Rubber .. Polyurethane .. or Polygrahite .. thank you.
The bushings in this kit are rubber.
Date published: 2016-05-05
will this work on a 67?
Date published: 2016-02-09
hello will this kit fit my 6cyl mustang?
Yes it will fit.
Date published: 2015-12-30
Hello. Will this kit work for a 69 mustang big block car? You other larger kits distinguish big block vs. small block and manual vs. power steering. Thank you.
This kit fits both small blocks and big blocks. It's our more complex kits (the Supreme kits) that are engine specific. The starter kits include a few less components, so they'll work on most any model.
Date published: 2015-09-18
Are there grease fittings on: 1 - both tie rod ends 2 - Upper control arm shaft 3 - upper and lower ball joints
can any of these be greased, ie. any kind of zirk fittings in the uca's?
You Might Also Like
CJ's Low Price:$476.99
CJ's Low Price:$769.99
CJ's Low Price:$769.99
CJ's Low Price:$750.99
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System Manual Steering Push Rod V8 1965-1973From:CJ's Low Price:$3,149.99