|1. The hole for the courtesy light should be cut 5 inches in from the rear of the door and 1 1/2 inches up from the bottom of the door.
2. The part number for the 64-66 courtesy light is and the 67-68 courtesy light is part number .
3. We also carry the gaskets for the courtesy lights. The part numbers for a pair of 64-66 gaskets is and the 67-68 gaskets are .
* Please be advised that this information is for suggestion only and is based on prior experience. We at CJ Pony Parts can not be held responsible or liable for any mistakes or injuries connected with the topics covered.