Vortech Supercharger Kit With Aftercooler Satin 10Lb V-3 Sl Si-Trim Bullitt 2008

Vortech: 4FU218-050L
CJ's Low Price:
1490832000 1058
Earn 6910 RPM Points What's this?
Vortech Supercharger Kit With Aftercooler Satin 10Lb V-3 Sl Si-Trim Bullitt 2008

Product Description

Vortech Satin Finish 10LB V-3 SL Si-Trim Supercharger Kit with Aftercooler for all 2008 Mustang Bullitts.

This V-3 SL Si-Trim Kit will increase the factory engine's horsepower from 315 to 494 and torque from 325 ft/lbs to 432 ft/lbs with an average of 10.5 Lbs. of boost at redline. This kit requires no oil lines to be run to the oil pan. The supercharger is self lubricating and includes a drain hose to change the fluid without removing the supercharger head unit.

Kit Includes:
- 3.60" drive pulley
- 6-rib supercharger drive
- A/C pulley, power steering pulley, alternator pulley, idlers and crank damper pulley
- Supplied Diablosport Predator programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.

Other Benefits Include:
- Live data monitoring and diagnostics
- Logging capability
- Reading and resetting DTC's

Fuel System Upgrade Includes:
- High flow 60 lb/hr replacement fuel injectors
- 255 lph "in-tank" fuel pump with harness. Used in conjunction with the OEM in-tank pump to provide a dual-pump configuration.

Air Inlet Assembly Includes:
- Roto-molded ducts
- Silicone sleeves
- Stainless steel clamps
- 98 mm MAF meter housing with filter
- Diablosport MAF interface adapter for extended meter range
- Air filter and shield
- Includes replacement engine coolant pipes and hose assemblies
- Billet aluminum supercharger mounting bracket assembly includes idlers, drive belt and all hardware

Large Charge Cooler Assembly Includes:
- Welded charge cooler assembly with cast tanks
- Molded silicone discharge elbow, Vortech race compressor bypass valve, silicone sleeves and stainless steel clamps
- Charge cooler surge tank with hoses, clamps and plumbing
- High-flow Bosch water circulation pump for closed loop cooling
- Large capacity, dual pass water cooler.
- Dual pass design and increased volume allows for increased heat exchange and improved performance during extended heavy throttle operation.

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 112.55ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 130.77ms
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like