Accel Coil Pack Supercoil Black Set EcoBoost 3.5L F-150 2011-2016

Accel:

140646K-6

Rating:

100% of 100

1 Review Add Your Review

Highlights

15% Increase In Spark
Better Throttle Response
Improved Fuel Economy
Sold As A Set Of Six

MSRP $345.95

$230.95

You save 33%

Earn

points.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

Set of Accel Black Supercoil Coil Packs for 2011, 2012, 2013, 2014, 2015 or 2016 F-150s with a 3.5L EcoBoost Engine.

If you are looking to improve the ignition system on your 2011-2016 3.5L EcoBoost F-150, then look no further! With this Set of Accel Black Supercoil Coil Packs available at CJ Pony Parts, the increase in spark energy optimizes windings, resistance and turn ratios.

Features and Benefits:
- Direct-Fit Upgrade for 2011-2016 3.5L F150s
- Up to 15% Increase in Spark Energy
- Improved Throttle Response
- Shock and Vibration Resistant High-Temperature Vacuum Applied Epoxy
- Maximizes Fuel Mileage
- Direct OEM Replacement
- ODB II Compatible
- Sold as a Set of 6
- Easy Installation

After years of offering their high output coil-on-plug coil packs for Mustangs, Accel now offers the benefits of the Supercoil to your 3.5L EcoBoost F-150! This Supercoil from Accel will put out up to 15% more energy than the stock coils which will improve throttle response and maximize your fuel mileage. To maximize the horsepower of your F-150, windings, resistance and turn ratios are all optimized with the Supercoil. The coils use a high-temperature vacuum applied epoxy that is resistant to shock and vibrations for consistent operation. To make installation of the coils easy, they were designed as a direct OEM replacement that is ODB II compatible and comes as a set of six.

California Residents: Proposition 65 Warning

Related Categories: Ford F-150 Parts, F-150 Engine

Installation & Fitment

Installation Videos

Video Transcript

If you've been following our YouTube channel, you've seen we've already done a ton of modifications to improve the performance of our EcoBoost F-150. The one area we still haven't touched is the ignition, so today we're going to swap out the factory ignition coils for a set of Accel Black Supercoils. These Black Accel Supercoils are going to be a direct fit replacement for the factory coils, but offer 15% more spark energy for better combustion. They're going to improve throttle response and efficiency, and they are shock and vibration resistant.

They come in a set of six and today we are going to be installing them in our 2016 EcoBoost F-150 for some more spark. This is probably going to be the easiest performance upgrade you can do to your EcoBoost F-150, and we're going to start off by removing the engine cover ... We're starting off on the passenger side. Installation is real simple. Just remove the 8 millimeter bolt on each coil and then remove the connector ... Pull down the red lock on the connector. Lift the coil out a little bit. Pinch down on the connector to remove it. Then remove the coil. Then just reverse the process with your new Accel Supercoil.

Reinstall the bolt and repeat the process on the other five coils ... Once all six coils are installed, you can reinstall the engine cover, and your installation is finished. Our Black Accel Supercoils are installed. Installation was very straightforward, but if you're like me and you're a little short, getting to the rear coils might be a little difficult. Installation should take about 15 to 20 minutes and before you know it, you'll be heading down the road.