AMK Products Lower Grille Molding Hardware Set 1970
Set of AMK Products Lower Grille Molding Hardware for all 1970 Mustangs.
If you're revitalizing the front end of your classic 1970 Mustang, you need a lot of bits and pieces, big and small, to get the job done. For one thing, you're going to need a new front grille and the molding that goes around it. After you've gathered up those parts, don't forget about all of the hardware you'll need to mount them! Make sure you also order this Set of AMK Products Lower Grille Molding Hardware from CJ Pony Parts so you can easily install your new lower grille molding.
This Set of AMK Products F-1141 Lower Grill Molding Hardware comes with everything you'll need to mount the lower grille molding on the front of your Mustang. It'll save you plenty of time, money and hassle in the long run. You won't have to worry about scrambling around, trying to find the right pieces of hardware to get the job done. This handy set of hardware puts everything you need right at your fingertips, making for a much easier restoration project.
You can buy dozens of new parts for your Mustang. However, many of these new parts won't come with the appropriate hardware, or will expect you to reuse your old, rusted out hardware pieces. Well, if you're in either situation, the wide selection of AMK Products offered by CJ Pony Parts can fill the void and easily allow you to install your new Mustang parts with fresh, shiny, new hardware.
Order a Set of AMK Products F-1141 Lower Grille Molding Hardware for your 1970 Mustang from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This product will fit the following Mustang years: